针对树脂基复合材料层板热压罐成型工艺,采用薄膜压力传感器建立了密实压力在线测试系统,用于监测成型过程中复合材料所受密实压力的大小和分布.研究了密实压力测试系统在热压罐工艺条件下的适用性,在此基础上以该系统为测试手段,研究了热压罐工艺下L形碳纤维/环氧树脂复合材料层板的密实压力变化规律及模具形式的影响.结果表明:所建立的密实压力测试系统具有较高的准确性和动态响应性,能够测试高温条件及曲面位置的密实压力,满足复合材料热压罐成型过程中密实压力的在线测试要求;L形复合材料层板成型过程中拐角区与平板区的密实压力随热压罐压力增大而增加,但增加速度和最终大小不同,阳模成型时拐角区密实压力高于平板区,阴模成型时拐角区密实压力小于平板区和外加压力,表明曲面结构与平板结构的密实行为具有差异性.
参考文献
| [1] | Gutowski T G,Morigaki T,Cai Z.The consolidation of laminate composites[J].Journal of Composite Materials,1987,21(2):172-188. |
| [2] | 顾轶卓,张佐光,李敏.复合材料热压成型过程的树脂压力测试系统[J].复合材料学报,2007,24(2):23-27.Gu Yizhuo,Zhang Zuoguang,Li Min.Resin pressure measuring system for hot pressing process of composites[J].Acta Materiae Compositae Sinica,2007,24(2):23-27. |
| [3] | 孙凯,李敏,顾轶卓,等.热压罐零吸胶工艺树脂压力在线测试及其变化规律[J].复合材料学报,2010,27(4):94-99.Sun Kai,Li Min,Gu Yizhuo,et al.Resin pressure online measuring and evolution during autoclave zero-bleeding process[J].Acta Materiae Compositae Sinica,2010,27(4):94-99. |
| [4] | 卢鑫,孙志杰,李超,等.硅橡胶热膨胀工艺预浸料铺层内树脂压力变化规律[J].复合材料学报,2011,28(3):50-55.Lu Xin,Sun Zhijie,Li Chao,et al.Resin pressure variation in prepreg stack during thermal expansion process with siliconerubber[J].Acta Materiae Compositae Sinica,2011,28(3):50-55. |
| [5] | 武湛君,张博明,王殿富,杜善义.用于FRP固化在线监测的光纤微弯压力传感器[J].复合材料学报,2002,19(6):125-129.Wu Zhanjun,Zhang Boming,Wang Dianfu,Du Shanyi.A novel fiber optic pressure sensor used in composite cure process monitoring[J].Acta Materiae Compositae Sinica,2002,19(6):125-129. |
| [6] | Cable D.Imbedded fiber optic pressure and temperature sensors enable cure monitoring of pultruded composite materials[C]//Conference on Effective Manufacturing Methods of Pultrusion.Mnahatten Beach,CA:Society of Manufacturing Engineers,1990. |
| [7] | 谢富原,王雪明,李敏,张佐光.T形加筋板热压罐成型过程压力分布与树脂流动实验研究[J].复合材料学报,2009,26(6):66-71.Xie Fuyuan,Wang Xueming,Li Min,Zhang Zuoguang.Experimental research on pressure distribution and resin flow of T-stiffened skins in autoclave process[J].Acta Materiae Compositae Sinica,2009,26(6):66-71. |
| [8] | Walczyk D,Kuppers J.Thermal press curing of advanced thermoset composite laminate parts[J].Composites Part A:Applied Science and Manufacturing,2012,43(4):635-646. |
| [9] | Xin C B,Gu Y Z,Li M,et al.Experimental and numerical study on the effect of rubber mold configuration on the compaction of composite angle laminates during autoclave processing[J].Composites Part A:Applied Science and Manufacturing,2011,42(10):1353-1360. |
| [10] | 李艳霞,李 敏,张佐光,顾轶卓.L形复合材料层板热压工艺密实变形过程的数值模拟[J].复合材料学报,2008,25(3):78-83.Li Yanxia,Li Min,Zhang Zuoguang,Gu Yizhuo.Numerical simulation on consolidation and deformation of L-shaped composite laminate in autoclave process[J].Acta Materiae Compositae Sinica,2008,25(3):78-83. |
| [11] | Hubert P,Poursartip A.Aspects of the compaction of composite angle laminates:An experimental investigation[J].Journal of Composite Materials,2001,35(1):2-26. |
| [12] | Gu Yizhuo,Li Min,Li Yanxia,Zhang Zuoguang.Pressure transfer behaviour of rubber mould and the effects on consolidation of L-shape composite laminates[J].Polymers and Polymer Composites,2010,18(3):167-174. |
| [13] | Sun Jing,Gu Yizhuo,Li Yanxia,Li Min,Zhang Zuoguang.Role of tool-part interaction in consolidation of L-shaped laminates during autoclave process[J].Applied Composite Materials,2012,19(3/4):583-697. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%