欢迎登录材料期刊网

材料期刊网

高级检索

将12CrMo、20CrMo、35CrMo和9CrMo钢在不同温度奥氏体化后,经中温等温转变,采用金相显微镜和QUANTA-400环境扫描电子显微镜观察了贝氏体的组织形貌,分析了其形成机理.结果表明,在低碳铬钼钢中形成无碳贝氏体;中碳铬钼钢的上贝氏体也是无碳贝氏体,下贝氏体中则有碳化物析出;而在高碳铬钼钢中,形成羽毛状的上贝氏体和竹叶状的下贝氏体.这表明含碳量对贝氏体的组织形貌有重要的影响.当贝氏体铁素体片条之间不能合并时,形成无碳贝氏体,随着含碳量的增加,当有碳化物析出时,就会形成羽毛状的上贝氏体或竹叶状的下贝氏体.

The morphology of bainite in 12CrMo,20CrMo,35CrMo and 9CrMo steel was observed using metallographic microscope and QLANTA-400 environmental scanning electron microscope after the samples were austenitized and then isothermally quenched at intermediate temperature zones respectively.The forming mechanism of bainite was investigated.The results show that massive or lamellar carbide-free bainite is obtained in the low carbon chromium-molybdenum steel,carbide-free upper bainite and lower bainite containing carbide are observed in the medium carbon chromium-molybdenum steel,while feather-shaped upper bainite and bamboo-leaf-shaped lower bainite form in the high carbon steel.It suggests a significant effect of carbon content on the morphology of bainite.It is considered that carbon-free bainite comes into being if the bainite ferrite laths can not combine together while with the the increase of carbon content,feather-shaped upper bainite and bamboo-leaf-shaped lower bainite will form when the carbide separates out.

参考文献

[1] LIU Zong-chang;REN Hui-ping.Diffusion Phase Transformation of Supercooled Austenite[M].北京:科学出版社,2007
[2] LIU Zong-chang.Principle of Material Microstructure Transformation[M].北京:冶金工业出版社,2006
[3] XU Zu-yao;LIU Shi-kai.Bainite Phase Transformation and Bainite[M].北京:科学出版社,1991
[4] LIU Zong-chang;REN Hui-ping;SONG Yi-quan.Metal Solid-State Phase Transformation[M].北京:冶金工业出版社,2003
[5] 刘宗昌,王海燕,计云萍,李文学,任慧平.钢中贝氏体相变理论研究的新进展[J].内蒙古科技大学学报,2008(02):99-108.
[6] 刘宗昌,王海燕,王玉峰,任慧平,李文学.贝氏体碳化物的形貌及形成机制[J].材料热处理学报,2008(01):32-37,46.
[7] KANG Mo-kuang;YANG Si-pin.Bainite of Steels[M].上海:上海科学技术出版社,1990
[8] FANG Hong-sheng.Bainite Phase Transformation[M].北京:科学出版社,1999
[9] Hehemann R F;Kinsman K R;Aaronson H I .A debate on bainite reaction[J].Metallurgical and Materials Transactions,1972,3(05):1077.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%