根据镀锌工艺要求设计ω(Al)为1.2%的TRIP钢进行实验研究,使用光学显微镜、SEM、XRD以及拉伸试验对TRIP钢的微观组织和性能进行检测和分析.结果表明,ω(Al)为1.2%的TRIP钢的Ac1达到747℃、Ac3达到930℃,在贝氏体区等温30 s即可得到最大强塑积.实验TRIP钢退火组织中残留奥氏体体积分数和残留奥氏体中的ω(C)可以通过改变两相区的温度以及贝氏体的等温时间加以控制.
参考文献
| [1] | E.M. Bellhouse;A.I.M. Mertens;J.R. McDermid .Development of the surface structure of TRIP steels prior to hot-dip galvanizing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(1/2):147-156. |
| [2] | 李壮,吴迪,王佳夫.无硅TRIP钢力学性能的研究[J].东北大学学报（自然科学版）,2005(05):452-455. |
| [3] | Traint.S;Pichler.A;Sticszny.P.Mechanical properties and phase transformation of an aluminium alloyed TRIP-steel[A].warrendale,2001 |
| [4] | M. De MEYER .The Influence of the Substitution of Si by Al on the Properties ofCold Rolled C-Mn-Si TRIP Steels[J].ISIJ International,1999(8):813-822. |
| [5] | M.R. Berrahmoune;S. Berveiller;K. Inal;A. Moulin;E. Patoor .Analysis of the martensitic transformation at various scales in TRIP steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):304-307. |
| [6] | B.C.De Coomaa .Structure-properties relationship in TRIP steel containing carbide-free bainite[J].Current Opinion in Solid State and Materials Science,2004,8:285-303. |
| [7] | Dong-Woo Suh;Seong-Jun Park;Chang-Seok Oh .Influence of partial replacement of Si by Al on the change of phase fraction during heat treatment of TRIP steels[J].Scripta materialia,2007(12):1097-1100. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%