F12耐热钢的性能分析及失效研究

金属功能材料, 2010, 17(6): 83-87.

F12耐热钢的性能分析及失效研究

陆传镇 ^1, , 胡正飞 ^2, , 付沛 ^3, , 赵俊韦 ^4,

1.同济大学,材料科学与工程学院,上海市金属功能材料开发应用重点实验室,上海,200092

2.同济大学,材料科学与工程学院,上海市金属功能材料开发应用重点实验室,上海,200092

3.同济大学,材料科学与工程学院,上海市金属功能材料开发应用重点实验室,上海,200092

4.同济大学,材料科学与工程学院,上海市金属功能材料开发应用重点实验室,上海,200092

关键词： F12耐热钢 , 碳化物 , 显微结构 , Z相

Property and Degradation Analysis of F12 Heat-Resistant Steel

F12耐热钢是一种典型12Cr耐热钢,开发于上个世纪中前期,六十年代得到了推广应用,现在仍然是许多热电厂的主要部件用材.本文主要分析了F12的基本结构、性能,对其性能劣势进行了探讨,并进一步分析了长期服役后材料性能、组织退化的特点,为今后的研究提供有益的参考.

参考文献

[1]	太田定雄;张善元;张绍林.铁素体系耐热钢[M].北京:冶金工业出版社,2003
[2]	Fujia T .Current progress in advanced high Cr ferritic steels forhigh-temperature applications[J].ISIJ International,1992,32(02):175-181.
[3]	Coutsouradis D.Materials for Adavanced Power Engineering[M].Dordrecht:Kluwer Academic Publications,1994
[4]	Gandy D.F12 Steel Handbook[M].USA:Electric Power Research Institute,2006
[5]	Zschau M;Niederhoff K .[J].VGB Kraftwerkstechnik,1994,74(02):111-118.
[6]	胡正飞,杨振国.高铬耐热钢的发展及其应用[J].钢铁研究学报,2003(03):60-65.
[7]	M. Kimura;K. Yamaguchi;M. Hayakawa .Microstructures of creep-fatigued 9-12 percent Cr ferritic heat-resisting steels[J].International Journal of Fatigue,2006(3):300-308.
[8]	Gupta G;Ampornrat P;Ren X;Sridharan K;Allen TR;Was GS .Role of grain boundary engineering in the SCC behavior of ferritic-martensitic alloy HT-9[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2007(2/3):160-173.
[9]	杨丽颖,王守仁,王红岩,王砚军.影响铸造耐热合金抗氧化性的因素分析[J].中国铸造装备与技术,2003(03):11-13.
[10]	Vitek J;Klueh R .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14A(07):1049-1053.
[11]	Janovec J;Svoboda M;Kroupa A .[J].Journal of Materials Science and Technology,2006,41:3425-3433.
[12]	Zhengfei Hu;Zhenguo Yang .[J].Journal of Materials Engineering and Performance,2003,12(01):110.
[13]	Kostka A;Tak K et al.[J].Acta Materialia,2007,55(03):546-648.
[14]	Pesicka J et al.[J].Materials Science and Engineering,2004,A387-389:176-180.
[15]	Rodak K.;Hernas A.;Kielbus A. .Substructure stability of highly alloyed martensitic steels for power industry[J].Materials Chemistry and Physics,2003(2/3):483-485.
[16]	Kouichi MARUYAMA;Kota SAWADA;Jun-ichi KOIKE .Strengthening Mechanisms of Creep Resistant Tempered Martensitic Steel[J].ISIJ International,2001(6):641-653.
[17]	于文杰;周洪良 .[J].焊接与切割,2005,4:59-62.
[18]	Tchizhik A;Tchizhik T .[J].Journal of Materials Processing Technology,1998,77(03):229-230.
[19]	Unoro J .[J].International Journal of Pressure Vessels and Piping,2006,83(04):540-545.
[20]	Baker R G;Nutting J .[J].Iron Steel Institute,1959,192(01):961.
[21]	刘永铨.钢的热处理[M].北京:冶金工业出版社,1981
[22]	Vitek J;Klueh R .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14A(03):1049-1053.
[23]	Yoshizawa;Igarashi .[J].International Journal of Pressure Vessels and Piping,2007,84(07):37-43.
[24]	Rodak K.;Hernas A.;Kielbus A. .Substructure stability of highly alloyed martensitic steels for power industry[J].Materials Chemistry and Physics,2003(2/3):483-485.
[25]	胡正飞,杨振国.长期高温时效F12耐热合金钢中碳化物形态和组分变化[J].金属学报,2003(02):131-135.
[26]	杨振国;胡正飞 .[J].理化检验-物理分册,2003,41(01):70-71.
[27]	Dobrzanski1 .[J].Journal of Materials Processing Technology,2005,164(02):786-791.
[28]	杨瑞成,余世杰,赵丽美.12Cr1MoV耐热钢高温加热过程中位错组态的TEM研究[J].兰州理工大学学报,2006(04):16-19.
[29]	陈国良.高温合金学[M].北京:冶金工业出版社,1985
[30]	Kostka A;Tak K et al.[J].Acta Materialia,2007,55(06):546-648.
[31]	VodareK V;Strang A .[J].Scripta Materialia,1998,38(01):103-104.
[32]	Kostka A;Tak K et al.[J].Acta Materialia,2007,55(08):546-648.
[33]	Danielsen K H;Hald J .[J].CALPHAD-Computer Coupling of Phase Diagrams and Thermochemistry,2007,31(05):505-514.
[34]	Baker R G;Nutting J .[J].Iron Steel Institute,1959,192(02):961.
[35]	宁保群,刘永长,殷红旗,韩雅静,杨留栓.超高临界压发电厂锅炉管用铁素体耐热钢的发展现状与研究前景[J].材料导报,2006(12):83-86.
[36]	大野笃夫;邢建东.金属的凝固理论、实践及应用[M].北京:机械工业出版社,1974
[37]	张永涛,张汉谦,王国栋,李金富.典型锅炉及压力容器用铁素体系铬钼耐热钢的发展回顾及成分设计[J].材料导报,2008(07):72-76.
[38]	Viswanathan R;Bakker W .[J].ASM International,2001,10(02):81-95.
[39]	Abe F .[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2003,34:913-925.
[40]	Lundin L .High resolution microanalysis of creep resistant 9% -12% Chromium Steels[D].Gteborg,Sweden:Chalmars University of Technology,1995.
[41]	Sonderegger B;Mitsche S;Cerjak H .[J].Materials Characterization,2007,58(07):874-882.
[42]	Hosoi Y;Wade N et al.[J].Nucl Mater,1986,461(05):141-143.
[43]	Lundin L .[J].AP-FIM Analysis of LAVES Phase,1995,34(05):74-744.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

F12耐热钢的性能分析及失效研究

Property and Degradation Analysis of F12 Heat-Resistant Steel

参考文献