阐述了热机械处理制备铝合金的微观组织特征,探讨了其主要工艺参数和第二相粒子对微观结构的作用机理,概述了热机械处理对铝合金微观组织及性能影响规律的最新进展,分析了当前热机械处理研究存在的主要问题,指出了今后热机械处理的研究发展方向.
The microstructure characteristics of aluminum alloys processed by thermo-mechanical treatment are studied, and its process parameters and the mechanisms of precipitation particles on the microstructure are analyzed.The latest development and a few problems of thermo-mechanical processing in aluminum alloys are pointed out. The direction of future research development about TMT is indicated.
参考文献
| [1] | P. KUCHNIO;A. TETERVAK;C. WATT .Quantification of Rapidly Solidified Microstructure of Al-Fe Droplets Using Correlation Length Analysis[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2009(1):196-203. |
| [2] | Varga B;Fazakas E;Hargitai H et al.Dilatometer study of rapidly solidified aluminium-silicon based alloys[J].Journal of Physics:Conference Series,2009,144(01):12105. |
| [3] | Mula, S;Ghosh, S;Pabi, SK .Synthesis of an Al-based Al-Cr-Co-Ce alloy by mechanical alloying and its thermal stability[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2008(1/2):208-213. |
| [4] | Wang Jinhui .Mechanical alloying of amorphous Al-SiO_2 powders[J].Journal of Alloys and Compounds,2008,456:139. |
| [5] | Qu S;An X H;Yang H J et al.Microstructural evolution and mechanical properties of Cu-Al alloys subjected to equal channel angular pressing[J].ACTA MATERIALIA,2009,57:1586. |
| [6] | C. Mallikarjuna;S.M. Shashidhara;U.S. Mallik .Evaluation Of Grain Refinement And Variation In Mechanical Properties Of Equal-channel Angular Pressed 2014 Aluminum Alloy[J].Materials & design,2009(5):1638-1642. |
| [7] | Cheng Xu;Zenji Horita;Terence G. Langdon .The evolution of homogeneity in an aluminum alloy processed using high-pressure torsion[J].Acta Materialia,2008(18):5168-5176. |
| [8] | Garcia-Infanta J M;Zhilyaev A P;Sharafutdinov A et al.An evidence of high strain rate superplasticity at interme-diate homologous temperatures in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion[J].Journal of Alloys and Compounds,2009,473(1-2):163. |
| [9] | Islamgaliev RK.;Mishra RS.;Mukherjee AK.;Valiev RZ. .Enhanced superplastic properties in bulk metastable nanostructured alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):206-210. |
| [10] | Ji, YH;Park, JJ .Development of severe plastic deformation by various asymmetric rolling processes[J].Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing,2009(1/2):14-17. |
| [11] | Jin H;Lloyd DJ .The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA5754[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):358-367. |
| [12] | Jong-Kook Lee;Dong Nyung Lee .Texture control and grain refinement of AA1050 Al alloy sheets by asymmetric rolling[J].International Journal of Mechanical Sciences,2008(5):869-887. |
| [13] | R. ROUMINA;C.W. SINCLAIR .Deformation Geometry and Through-Thickness Strain Gradients in Asymmetric Rolling[J].Metallurgical and materials transactions. A, physical metallurgy and materials science,2008(10):2495-2503. |
| [14] | Jin H;Lloyd D J .The tensile response of a fine-grained AA5752 alloy produced by asymmetric rolling and annealing[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2001,35:997. |
| [15] | Russo E Di;Conserva M;Gatto F et al.Thermomechanical treatments on high strength Al-Zn-Mg(Cu) alloys[J].Metallurgical Transactions,1973,4:1133. |
| [16] | Russo E Di;Conserva M;Buratti M .A new thermomechanical procedure for improving the ductility and toughness of Al-Zn-Mg-Cu alloys in the transverse directions[J].Materials Science and Engineering,1974,14(10):23. |
| [17] | Weft John A;Paton N E;Hamilton C H et al.Grain refinement in 7075 aluminum by thermomechanical processing[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1981,12:1267. |
| [18] | 吉田英雄.飞机用高强度铝合金的形变热处理及其应用[J].铝加工技术,1994(04):31. |
| [19] | Waldman J;Sulinski H;Markus H .The effect of ingot processing treatments on the grain size and properties of Al alloy 7075[J].Metallurgical and Materials Transactions,1974,5:573. |
| [20] | 田荣璋;王祝堂.铝合金及其加工手册[M].长沙:中南大学出版社,2000:186. |
| [21] | 宁爱林,刘志义,曾苏民,莫亚武.铝合金形变热处理工艺研究进展[J].材料导报,2007(03):74-76,80. |
| [22] | MaQueen H J;Em Prof .Historical evolution of thermomechanical process applied to aluminum alloys[J].Materials Science Forum,2006,519-521:1493. |
| [23] | Waldman J;Sulinski H;Markus H .Processes for the fabrication of 7000 series aluminum alloys[P].US,3847681,1974-11-12. |
| [24] | Humphreys F J .Recrystallization mechanism in two-phase alloys[J].Metal Science Journal,1979,13:136. |
| [25] | El-Bradie Z M;El-Sayed M .Effect of double thermome-chanical treatments on the properties of 7075 alloy[J].Journal of Materials Processing Technology,1996,62:76. |
| [26] | Olaf Engler;Jurgen Hirsch .Texture control by thermomechanical processing of AA6xxx Al-Mg-Si sheet alloys for automotive applications--a review[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):249-262. |
| [27] | Liu W C;Zhai T;Man C S et al.Effect of initial texture on texture evolution in cold-rolled AA 5182 aluminium alloy[J].Philosophical Magazine,2004,84(31):3305. |
| [28] | Liu W C;Zhai T;Morris J G .Texture evolution of continuous cast and direct chill cast AA 3003 aluminum alloys during cold rolling[J].Scripta Materialia,2004,51:83. |
| [29] | Yu XF;Zhao YM;Wen XY;Zhai T .A study of mechanical isotropy of continuous cast and direct chill cast AA5182 Al alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):376-384. |
| [30] | Huh MY.;Engler O.;Cho SY. .Randomization of the annealing texture in aluminum 5182 sheet by cross-rolling[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):35-46. |
| [31] | Liu W C;Zhai T;Man C S et al.Quantification of recrys-tallization texture evolution in cold rolled AA 5182 aluminum alloy[J].Scripta Materialia,2003,49:539. |
| [32] | Singh A K;Saha G G;Gokhale A A et al.Evolution of texture and microstructure in a thermomechanically processed Al-Li-Cu-Mg alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29(02):665. |
| [33] | Liu WC.;Morris JG. .Comparison of the texture evolution in cold rolled DC and SC AA 5182 aluminum alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):183-193. |
| [34] | Liu W C;Morris J G .Quantitative analysis of texture evolution in cold-rolled,continuous-cast AA 5xxx-series aluminum alloys[J].Metallurgical and Materials Transactions A,2004,35:265. |
| [35] | Srivatsan T S .Ralationship between annealing and recrystallization in an aluminium-lithium alloy[J].Journal of Materials Science Letters,1987,6:948. |
| [36] | Chaturvedi M C;Chung D W;Doucette R A.Effect of ther-momechanical treatment on structure and properties of 2036 aluminum alloy[J].Metal Science Journal,1979(01):34. |
| [37] | Furu T.;Baxter GJ.;Sellars CM.;Shercliff HR. .The influence of transient deformation conditions on recrystallization during thermomechanical processing of an Al-1% Mg alloy[J].Acta materialia,1999(8):2377-2389. |
| [38] | Baxter G J;Furu T;Zhu Q et al.The influence of transient strain-rate deformation conditions on the deformed microstructure of aluminium alloy Al-1%Mg[J].Acta Materialia,1999,47(08):2367. |
| [39] | Es-Said O S;Fisher F;Johansen D et al.The effect of the rolling mode on the recrystallization behavior of 2090 Al-Li alloy[J].Journal of Materials Engineering and Performance,1994,3(02):292. |
| [40] | Brampton C C;Wert J A;Mahoney M W .Heating rate effects on recrystallized grain size in two Al-Zn-Mg-Cu alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1982,13:193. |
| [41] | Anthony W Thompson .Substructure strengthening mechanisms[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1977,8:833. |
| [42] | 郑子樵.材料科学基础[M].长沙:中南大学出版社,2005:476. |
| [43] | Singh S;Goel D B .Thermomechanical aging(TMA) on tensile properties of 2014 aluminium alloy for aerospace applications[J].Bulletin of Materials Sciences In press,1991,14(01):35. |
| [44] | L.S. Kramer;T.P. Blair;S.D. Blough .Stress-Corrosion Cracking Susceptibility of Various Product Forms of Aluminum Alloy 2519[J].Journal of Materials Engineering and Performance,2002(6):645-650. |
| [45] | S Singh;D B Goel .Influence of thermomechanical aging on fatigue behaviour of 2014 Al-alloy[J].Bulletin of Materials Science,2005(2):91-96. |
| [46] | Jahn M T;Max B G Jen .Effects of TAHA treatments on the fatigue life of 7075 aluminium alloy[J].Journal of Materials Science,1986,21:799. |
| [47] | 李伟,郑子樵,李世晨.细化晶粒的新方法--等径转角挤压[J].材料导报,2001(10):25-28. |
| [48] | Smolej A;Gnamus M;Slacek E .The influence of the thermomechanical processing and forming parameters on superplastic behaviour of the 7475 aluminium alloy[J].Journal of Materials Processing Technology,2001,118:397. |
| [49] | A. KUMAR;A.K. MUKHOPADHYAY;K.S. PRASAD .Superplastic Behavior of a High-Strength Al-Zn-Mg-Cu-Zr Alloy[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2009(2):278-281. |
| [50] | Jiang Xinggang et al.A new grain-refinment process for superplasticity of high-strength 7075 aluminum alloy[J].Journal of Materials Science,1993,28:6035. |
| [51] | Campbell Lard .Effect of dislocation substructures on fatigue fracture[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1977,8:851. |
| [52] | Ostermann F .Improved fatigue resistance of Al-Zn-Mg-Cu (7075) alloys through thermomechanical processing[J].Metallurgical Transactions,1971,2:2897. |
| [53] | Jahn M T;Luo Jin .Tensile and fatigue properties of thermomechanically treated 7475 Al-alloy[J].Journal of Materials Science,1988,23:4115. |
| [54] | Farhad Mehrpay;David L Kudsin;Haworth W L .Effect of thermomechanical treatment on fatigue strength in 7075 aluminum[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1976,7:761. |
| [55] | Tom Quested;Mischa Crumbach;Richard Hamerton .Industrial application of through-process modelling Ⅰ:Microstructural descriptors required from the casting model for downstream process stages[J].Materials Science Forum,2006,519-521:1782. |
| [56] | Tom Quested;Mischa Crumbach et al.Industrial application of through-process modelling Ⅱ:Microstructural models and descriptors required for thermo-mechanical processing[J].Materials Science Forum,2006,519-521:1511. |
| [57] | [OL].http://www.imm.rwth-aachen.de/simweb |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%