欢迎登录材料期刊网

材料期刊网

高级检索

采用单丝复合体系多次断裂法,通过对纤维单丝断点数的统计及其断点形貌的分析,考察了PBO纤维、芳纶Twaron纤维、超高分子量聚乙烯纤维(UHMWPE)3种高性能有机纤维与韧性环氧基体的界面剪切强度;并对比考察了界面剪切强度与对应复合材料单向板层间剪切强度之间的关系;结合XPS、SEM等手段分析了有机纤维表面物理化学特性对界面剪切强度的影响.结果表明,Twaron/环氧的界面剪切强度高于PBO/环氧,UHMWPE/环氧的界面粘结弱,该方法不能测试;上述体系界面剪切强度与对应的复合材料单向板层间剪切强度变化趋势是一致的;表面化学活性高的纤维对应的界面剪切强度高.

参考文献

[1] 张子龙.复合材料面内剪切Iosipescu方法分析及试验研究[J].航空材料学报,1996,16(1):55-60.Zhang Zilong.Theoretical and experimental study on the Iosipescu shear test method[J].Journal of Aeronautical Materials,1996,16(1):55-60.
[2] Piggott M R.Why interface testing by single-fiber methods can be misleading[J].Composites Science and Technology,1997,57(8):965-974.
[3] Park Joung-Man,Kong Jin-Woo,Kim Jin-Wo,Yoon DongJin.Interfacial evaluation of electrodeposited single carbon fiber/epoxy composites by fiber fracture source location using fragmentation test and acoustic emission[J].Composites Science and Technology,2004,64(7/8):983-999.
[4] 李学梅,王继辉.单纤维复合材料断裂实验表征界面研究[J].武汉理工大学学报,2005,27(4):9-12.Li Xuemei,Wang Jihui.Study on the interfacial adhesion condition by single-fiber composite fragmentation test[J].Journal of Wuhan University of Technology,2005,27 (4):9-12.
[5] Zhandarov Serge,M(a)der Edith.Indirect estimation of fiber/polymer bond strength and interfacial friction from maximum load values recorded in the microbond and pull-out tests Ⅱ:Critical energy release rate[J].Adhesion Sci and Technol,2003,17(7):967-980.
[6] 王斌,金志浩,丘哲明,刘爱华.高性能有机纤维复合材料及其界面性能[J].宇航材料工艺,2001,31(4):15-20.Wang Bin,Jin Zhihao,Qiu Zheming,Liu Aihua.High performance organic fiber composites and its interface properties[J].Aerospace Materials & Technology,2001,31(4):15-20.
[7] Zhandarov Serge,M(a)der Edith.Characterization of fiber/matrix interface strength:Applicability of different tests,approaches and parameters[J].Composites Science and Technology,2005,65(1):149-160.
[8] Kelly A,Tyson W R.Tensile properties of fiber-reinforced metals:Copper/tungsten and copper/molybdenum[J].Journal of the Mechanics and Physics of Solids,1965,13(6):329-338.
[9] 王宏岗,郑安呐,戴干策.玻璃纤维增强聚丙烯复合材料界面结合的研究I:界面剪切强度[J].复合材料学报,1999,16(3):46-50.Wang Honggang,Zhen Anna,Dai Gance.Study on the interfacial bonding of glass fiber reinforced polypropylene composites Ⅰ:Interfacial shear strength[J].Acta Materiae Compositae Sinica,1999,16(3):46-50.
[10] 杨光松,王兴业,蒋咏秋,等.界面剪切强度的AE监测及统计模型评估[J].复合材料学报,1991,8(4):75-80.Yang Guangsong,Wang Xingye,Jiang Yongqiu,et al.Measurement of fiber fragment length distribution(SFC)with AE technique and determination of the interfacial shear strength by a statistical model[J].Acta Materiae Compositae Sinica,1991,8(4):75-80.
[11] Khalili A,Kromp K.Statistical properties of Weibull estimators[J].Journal of Materials Science,1991,26(24):6741-6752.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%