欢迎登录材料期刊网

材料期刊网

高级检索

采用弯曲实验、金相和扫描电子显微镜,研究轧制温度、变形量对钢/铝复合板热轧复合的结合强度、界面和厚比分配的影响.结果表明:在轧制温度低于400℃时,弯曲次数随着预热温度的升高而增加,之后又逐渐减少:轧制温度在400℃时钢/铝复合板结合界面的结合强度最大;随着轧制温度的升高,铝层的压下量增加,钢层的压下量减小,致使两者压下量的差值增加;总的压下量越大,弯曲次数越多,结合界面和结合强度越好:当总压下量为20%~30%时,弯曲次数随压下量的增加而缓慢增加;当总压下量>30%时,弯曲次数随压下量的增加而快速增加;随着总压下量的增加,钢和铝的压下量成正比关系增加,变化趋势相同,组元压下量的差值随总压下鼍的增加而减小,变形量趋于一致.

参考文献

[1] 谭树松.有色金属材料学[M].北京:冶金工业出版社,1993:1-3.
[2] 朱旭霞 .不锈钢/铝(合金)/不锈钢多层材料热轧复合及性能研究[D].中南工业大学,2000.
[3] 孙德勤,谢建新,吴春京.复合板的成形技术与发展趋势[J].金属成形工艺,2003(02):19-22.
[4] 于九明;于长生;朱泉 .轧制温度对复合板初结合强度的影响[J].东北大学学报(自然科学版),1995,16(05):491-494.
[5] I. E. Lee;D. H. Bae;W. S. Chung;K. H. Kim;J. H. Lee;Y. R. Cho .Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/copper clad-metal sheets[J].Journal of Materials Processing Technology,2007(0):546-549.
[6] H. Danesh Manesh;A. Karimi Taheri .Bond strength and formability of an aluminum-clad steel sheet[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2003(1/2):138-143.
[7] DANESH MANESH H;KARIMI TAHERI A .The effect of annealing treatment on mechanical properties of aluminum-clad steel sheet[J].Materials & Design,2003,24:617-622.
[8] H.D. Manesh;A.K. Taheri .Theoretical and experimental investigation of cold rolling of tri-layer strip[J].Journal of Materials Processing Technology,2005(2):163-172.
[9] 韦家弘,王慧敏,甘卫平.金属复合轧制包覆率和长度配比的研究[J].中南工业大学学报,2000(03):264.
[10] JINDAL V;SRIVASTAVA V C .Growth of intermetallic layer at roll bonded IF-steel/aluminum interface[J].Journal of Materials Processing Technology,2007,10:118-122.
[11] Danielewski M;Wierzba B .Mechano-chemistry; diffusion in multicomponent compressible mixtures[J].Physica, A. Statistical mechanics and its applications,2008(4):745-756.
[12] YU H C;YEON D H;VANDER V A;THORNTON K .Substitutional diffusion and Krikendall effect in binary crystalline solids containing discrete vacancy sources and sinks[J].Acta Materialia,2007,55:6690-6704.
[13] PENG X K;HENESS G;YEUNG W Y .Effect of rolling temperature on interface and bond strength development of roll bonded metal laminates[J].Materials Science,1999,34(02):277-281.
[14] DYBKOY V I .Interaction of 18-Cr-10Ni stainless steel with liquid aluminium[J].Materials Science,1990,25:3615-3621.
[15] Wang Deqing;Shi Ziyuan;Qi Ruobin .Cladding of stainless steel on aluminum and carbon steel by interlayer diffusion bonding[J].Scripta materialia,2007(5):369-372.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%