欢迎登录材料期刊网

材料期刊网

高级检索

研究了CYD-128/GA-327环氧树脂体系在纯树脂和有玻璃纤维存在下的固化特性.结果表明:玻璃纤维加入后使复合材料体系的表观活化能、指前因子、反应级数和反应速率常数有小幅增加;固化放热峰面积和反应热明显下降,且下降幅度随纤维质量含量的增加而增大.纤维的加入,使得复合材料体系在相同升温速率下的最大固化反应速率降低,固化起始温度提前,达到最大固化反应速率的时间延长,固化反应完成所需的时间变长.在170℃以前,纤维的加入对树脂体系的固化反应具有催化作用,170℃以后,纤维的加入对树脂体系的固化反应具有缓聚作用.

参考文献

[1] C. Marieta;E. Schulz;L. Irusta .Evaluation of fiber surface treatment and toughening of thermoset matrix on the interfacial behaviour of carbon fiber-reinforced cyanate matrix composites[J].Composites science and technology,2005(14):2189-2197.
[2] Zhiqian Zhang;Yuwen Liu;Yudong Huang .The effect of carbon-fiber surface properties on the electron-beam curing of epoxy-resin composites[J].Composites science and technology,2002(3):331-337.
[3] Asdrubal J Cedeno;Humberto Vazquez-Torres .Kinetic study of the effect of poly(phenyl sulfone) on the curing of an epoxy/amine resin by conventional and by temperature-modulated differential scanning calorimetry[J].Polymer international,2005(8):1141-1152.
[4] Mijovic J;Wang H T .Cure kinetics of neat and graphitefiber-reinforced epoxy formulations[J].Journal of Applied Polymer Science,1989,37(09):2661-2673.
[5] Garton A;Stevenson W T K .Crosslinking of epoxy resins at interfaces.Ⅳ Anhydride-cured resins at carbon and graphite surfaces[J].Journal of Polymer Science Part A:Polymer Chemistry,1988,26(02):541-557.
[6] V.M.Karbhari;L.Kabalnova .Effect of Sizing and Loading Levels on the Cure Kinetics of Carbon Fiber Vinylester Composites[J].Journal of Reinforced Plastics and Composites,2001(2):90-104.
[7] 谢鸿峰,刘炳华,孙清,袁钻如,沈俭一,程镕时.气相生长碳纤维对环氧树脂固化反应的影响及其复合物固化动力学研究[J].高分子学报,2005(06):891-895.
[8] 卢晓春,信春玲,杨小平,余鼎声.碳纤维表面对苯并(口恶)嗪树脂固化动力学的影响[J].北京化工大学学报(自然科学版),2005(04):48-51.
[9] 石海洋,李鹏,薛忠民,杨小平.GF/VE复合材料的等温固化动力学模型[J].高分子材料科学与工程,2006(05):113-116.
[10] 石海洋 .乙烯基酯树脂基复合材料固化动力学及其RTM工艺缺陷研究[D].北京化工大学,2006.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%