欢迎登录材料期刊网

材料期刊网

高级检索

采用固相法制备(Sm1-xBix)05Sr05CoO3-δ (0≤x≤0.5),研究不同Bi3+掺杂浓度对材料的晶体结构、表面形貌与光学性能的影响.结果表明,当掺量0≤x(Bi3+)≤0.2,材料为单一纯相的钙钛矿结构;当掺量0.3≤x≤0.5,材料主相仍保持着钙钛矿结构,同时出现杂相CoO与Sr0.5CoBi0.5Ox.(Sm1-xBix)05Sr05CoO3-δ平均粒径随着Bi3+掺量的增加由1.98 μm增大为9.77 μm,晶粒形状由多边形状变为方块状;光学测试表明,随着Bi3+浓度的增加,材料的光学吸收率由0.73增大到0.87,发射率由0.34增大到0.80.

参考文献

[1] 高峰;孙成权;刘全根.太阳能开发利用的现状及发展趋势[J].世界科技研究与发展,2001(4):35-39.
[2] 陆维德.太阳能利用技术发展趋势评述[J].世界科技研究与发展,2007(01):95-99.
[3] 陈德明;徐刚.太阳能热利用技术概况[J].物理,2007(11):840-847.
[4] Xiaoxin Wang;Haofeng Li;Xiaobai Yu;Xiaoling Shi;Jifeng Liu.High-performance solution-processed plasmonic Ni nanochain-Al_2O_3 selective solar thermal absorbers[J].Applied physics letters,201220(20):203109-1-203109-5.
[5] Martin Roeb;Hans Mueller-Steinhagen.Concentrating on Solar Electricity and Fuels[J].Science,2010Aug.13 TN.5993(Aug.13 TN.5993):773-774.
[6] Daniel Kraemer;Bed Poudel;Hsien-Ping Feng.High-performance flat-panel solar thermoelectric generators with high thermal concentration[J].Nature materials,20117(7):532-538.
[7] Yitzhak Mastai;Sebastian Polarz;Markus Antonietti.Silica-Carbon Nanocomposites-A New Concept for the Design of Solar Absorbers[J].Advanced functional materials,20023(3):197-202.
[8] M.R. Bayati;M.H. Shariat;K. Janghorban.Design of chemical composition and optimum working conditions for trivalent black chromium electroplating bath used for solar thermal collectors[J].Renewable energy,200514(14):2163-2178.
[9] Harish C. Barshilia;N. Selvakumar;K.S. Rajam;D.V. Sridhara Rao;K. Muraleedharan.Deposition And Characterization Of Tialn/tialon/si_3n_4 Tandem Absorbers Prepared Using Reactive Direct Current Magnetron Sputtering[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,200818(18):6071-6078.
[10] Kaluza L.;Drazic G.;Kohl M.;Orel B..Sol-gel derived CuCoMnOx spinel coatings for solar absorbers: Structural and optical properties[J].Solar Energy Materials and Solar Cells: An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy Conversion,20012(2):187-201.
[11] Yao, Zhongping;Hu, Bing;Shen, Qiaoxiang;Niu, Aoxiang;Jiang, Zhaohua;Su, Peibo;Ju, Pengfei.Preparation of black high absorbance and high emissivity thermal control coating on Ti alloy by plasma electrolytic oxidation[J].Surface & Coatings Technology,2014:166-170.
[12] Lu, Yi;Fang, Zhenggang;Lu, Chunhua;Wei, Ling;Ni, Yaru;Xu, Zhongzi;Tao, Shunyan.High thermal radiation of Ca-doped lanthanum chromite[J].RSC Advances,201539(39):30667-30674.
[13] Martin Günthner;Markus Pscherer;Christian Kaufmann;Günter Motza.High emissivity coatings based on polysilazanes for flexible Cu(In,Ga)Se_2 thin-film solar cells[J].Solar Energy Materials and Solar Cells: An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy Conversion,2014:97-103.
[14] Eric N. Armstrong;Keith L. Duncan;Eric D. Wachsman.Effect of A and B-site cations on surface exchange coefficient for ABO3 perovskite materials[J].Physical chemistry chemical physics: PCCP,20137(7):2298-2308.
[15] 朱志杰;唐有根;宋永江;罗继.钙钛矿催化剂的改性与性能研究[J].功能材料,2007(11):1834-1836,1840.
[16] Xia CR.;Rauch W.;Chen FL.;Liu ML..Sm0.5Sr0.5CoO3 cathodes for low-temperature SOFCs[J].Solid state ionics,20021/2(1/2):11-19.
[17] Shuo Yang;Tianmin He;Qiang He.Sm_(0.5)Sr_(0.5)CoO_3 cathode material from glycine-nitrate process: Formation, characterization, and application in LaGaO_3-based solid oxide fuel cells[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,20081/2(1/2):400-404.
[18] V. Gil;J. Tartaj;C. Moure.Rapid densification by using Bi_2O_3 as an aid for sintering of gadolinia-doped ceria ceramics[J].CERAMICS INTERNATIONAL,20073(3):471-475.
[19] Florent Belnou;Jerome Bernard;David Houivet.Low temperature sintering of MgTiO_3 with bismuth oxide based additions[J].Journal of the European Ceramic Society,200512(12):2785-2789.
[20] Kok-Wan Tay;Yen-Pei Fu;Jen-Fen Huang.Effect of Bi_2O_3 and B_2O_3 additives on the sintering temperature, microstructure, and microwave dielectric properties for Sm(Mg_(0.5)Ti_(0.5))O_3 ceramics[J].CERAMICS INTERNATIONAL,20113(3):1025-1031.
[21] B. Bai;N.M. Sammes;A.L. Smimova.Physical and electrochemical characterization of Bi_2O_3-doped scandia stabilized zirconia[J].Journal of Power Sources,20081(1):76-81.
[22] Lijun Jia;Huaiwu Zhang;Yingli Liu;Zhiyong Zhong;Qiye Wen.Effects of mixing procedure and Bi2O3 content on structural and magnetic properties of hexaferrites sintered at low temperature[J].Journal of Magnetism and Magnetic Materials,20071(1):67-72.
[23] R. Punia;R. S. Kundu;J. Hooda;S. Dhankhar;Sajjan Dahiya;N. Kishore.Effect of Bi_(2)O_(3) on structural, optical, and other physical properties of semiconducting zinc vanadate glasses[J].Journal of Applied Physics,20113(3):033527-1-033527-6.
[24] XiudiXiao;LeiMiao;GangXu;Limei Lu;ZhanminSu;NingWang;SakaeTanemura.A facile process to prepare copper oxide thin films as solar selective absorbers[J].Applied Surface Science,201124(24):10729-10736.
[25] Yu Z;Sun K;Li LH;Liu YF;Lan ZW;Zhang HW.Influences of Bi2O3 on microstructure and magnetic properties of MnZn ferrite[J].Journal of Magnetism and Magnetic Materials,20086(6):919-923.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%