欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(38063)
  • 图书()
  • 专利()
  • 新闻()

THE STRAIN CYCLIC CHARACTERISTICS AND RATCHETING OF U71Mn RAIL STEEL UNDER UNIAXIAL LOADING

G.Z. Kang , Q. Gao , X.J.Yang and Y.F. Sun(Department of Applied Mechanics and Engineering , Southwest Jiaotong University , Chengdu 610031 , China)

金属学报(英文版)

An experimental study was carried out of the cyclic behavior of U71Mn rail steel subjected to uniaxial strain and stress. The effects of cyclic struin amplitude, mean struin,strain loading rate and their histories on the strain cyclic characteristics were studied.Under the asymmetrical stress cycling, the effects of stress amplitude, mean stress,stress loading rate and their histories on the ratcheting were analyzed. The interaction between strain cycling and stress cycling was also discussed. It is shown that either the cyclic characteristics under strain cycling or the ratcheting under asymmetrical stress cycling depends not only on the cumnt loading state, but also on the previous loading history. Some significant results are obtained.

关键词: cyclic plasticity , null , null

DYNAMIC ASPECTS OF LINEAR ELASTIC FRACTURE-MECHANICS APPLIED TO DIELECTRIC-BREAKDOWN

Journal of Physics D-Applied Physics

The dynamic aspects of linear elastic fracture mechanics applied to dielectric breakdown are studied. In the same direction as the fracture mechanics analogue for dielectric breakdown described previously by some researchers, this paper develops the intrinsic, rate-dependent bond breakdown micromechanism to account for the dynamic process of dielectric breakdown. The formulae of conducting microcrack growth rate and lifetime prediction are derived and applied to the experimental data of SiO2 films.

关键词: sio2-films;oxides

FRACTURE MECHANICS ANALYSIS OF THERMAL STRAIN FATIGUE LIFE FOR THE SINTERING MACHINE PALLET

LI Zhenzi and LI Ming (Department of Architectnre Engineering , Central South University of Technology , Changsha 410083 , China)LIAO Fuchang (Shenzhen School of Technology , Shenzhen 518029 , China)Manuscript received 10 August 1995 , in revised form 12 April 1996

金属学报(英文版)

In recent years elastic-plastic fracture mechanics has developed rapidly and is widely used to solve various engineering problems. The application of elastic-plastic fracture mechanics on the pallet of sintering machine is approached in detail for the first time in the present study. The theoretical results were compared with the actual data determined from sintering machine pallet. Results show that good agreement was achieved between the method suggested by the author and the actual data. The basis of determining design of the sintering machine pallet in iron and steel engineering has been provided and it will result in great economic benefits.

关键词: : pallet , null , null , null

Study on the Relationship Between J-Integral and COD

Y.G. Cao , X.Y. Sun

金属学报(英文版)

J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.

关键词: FRASTA , null , null

Tunable magnetocaloric effect around hydrogen liquefaction temperature in Tb(1-x)Y(x)CoC(2) compounds

Physica B-Condensed Matter

The magnetic properties and magnetocaloric effect of Tb(1-x)Y(x)CoC(2) (x = 0, 0.1, 0.2, 0.3, 0.4) compounds have been investigated systematically. All the compounds undergo second-order transitions from paramagnetic to ferromagnetic states without thermal and magnetic hysteresis. With increasing Y content from 0 to 0.4, the Curie temperatures decrease nearly linearly from 28 to 18 K. The nature of the second-order phase transitions can be confirmed by Arrott plots. For Tb(0.6)Y(0.4)CoC(2) compound, the maximum value of the magnetic entropy change -Delta S(M) at 20 K is 9.35 J kg(-1) K(-1) for an external field change of 5T (5.14 J kg(-1) K(-1) for 2T). The large reversible magnetic entropy change makes Tb(0.6)Y(04)CoC(2) compound an attractive candidate for the application at hydrogen liquefaction temperature. (C) 2010 Elsevier B.V. All rights reserved.

关键词: Curie temperature;Magnetocaloric effect;Magnetic properties;ac susceptibility

Superconductivity modulated by internal pressure in Ce(1-x)Gd(x)FeAsO(0.84)F(0.16) compounds

Superconductor Science & Technology

It is shown that the superconductivity in Ce(1-x)Gd(x)FeAsO(0.84)F(0.16) compounds can be modulated by internal (chemical) pressure. The internal pressure is induced by Gd substitution for Ce in CeFeAsO(0.84)F(0.16), which compresses the crystal lattice. The temperature dependences of resistivity and magnetization show that the superconducting-transition temperature T(c) is enhanced from 40 K for CeFeAsO(0.84)F(0.16) to 47.5 K for Ce(0.6)Gd(0.4)FeAsO(0.84)F(0.16). The increase and subsequent decrease of Tc upon application of external pressure, as observed previously in LaFeAsO(0.89)F(0.11), is entirely confirmed by the modulation of Tc of the Ce(1-x)Gd(x)FeAsO(0.84)F(0.16) superconductors by internal pressure.

关键词: layered quaternary compound;43 k;iron

Biomimicry of bamboo bast fiber with engineering composite materials

Materials Science & Engineering C-Biomimetic Materials Sensors and Systems

Bamboo, one of the strongest natural structural composite materials, has many distinguishing features. It has been found that its reinforcement unit, hollow, multilayered and spirally-wound bast fiber, plays an extremely important role in its mechanical behavior. In the present work, on the basis of the study on bamboo bast fiber and wood tracheid, a biomimetic model of the reinforcing element, composed of two layers of helically wound fiber, was suggested. To detect the structural characteristics of such a microstructure, four types of macro fiber specimens made of engineering composites were employed: axially aligned solid and hollow cylinders, and single- and double-helical hollow cylinders. These specimens were subjected to several possible loadings, and the experimental results reveal that only the double-helical structural unit possesses the optimum comprehensive mechanical properties. An interlaminar transition zone model imitating bamboo bast fiber was proposed and was verified by engineering composite materials. In our work, the transition zone can increase the interlaminar shear strength of the composite materials by about 15%. These biomimetic structural models can be applied in the design and manufacture of engineering composite materials.

关键词: bamboo;bast fiber;biomimetics;engineering composites

Multiferroic phase diagram of Y partially substituted Dy(1-x)Y(x)MnO(3)

Applied Physics Letters

The effect of nonmagnetic Y partial substitution at the Dy site in Dy(1-x)Y(x)MnO(3) up to x=0.2 on magnetism, specific heat, and ferroelectricity is investigated, which resulted in a preliminary multiferroic phase diagram. It is revealed that the Y partial substitution suppresses the Dy-spin ordering point (T(Dy)) and ferroelectric ordering point (T(FE)) but enhances the Mn-spin ordering point (T(N)). The interaction between the spins of Dy and Mn is remarkably affected by Y substitution. The measured electrical polarization depends on the Y substitution in a complex way because the ferroelectricity is sensitive to the interaction between the spins of Dy and Mn. (c) 2011 American Institute of Physics. [doi: 10.1063/1.3536506]

关键词: ferroelectricity;polarization

J(τ_0γ_0/(x_1x_2))行列式与弹塑性J积分不守恒的理论与实验证明

刘叔仪

金属学报

<正> 作为固体脆性断裂判据的J积分,其数值与其积分路径无关,这在文献中叫“守恒性”。这个守恒性已被推广到塑性断裂,这到底有否根据?本文目的是作这个问题的证明。未用原作者的方法,但由两个旋度判据得到应力应变函数行列式给出的一些否定结论,希望这对J积分应用条件的了解有所助益。1.弹塑性J积分守恒的条件 J积分

关键词:

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共3807页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词