LIU Gu
,
WANG Liu-ying
,
CHEN Gui-ming
,
HUA Shao-chun
钢铁研究学报(英文版)
Plasma surface hardening process was performed to improve the performance of the AISI 1045 carbon steel. Experiments were carried out to characterize the hardening qualities. A predicting and optimizing model using genetic algorithm-back propagation neural network (GA-BP) was developed based on the experimental results. The non-linear relationship between properties of hardening layers and process parameters was established. The results show that the GA-BP predicting model is reliable since prediction results are in rather good agreement with measured results. The optimal properties of the hardened layer were deduced from GA. And through multi optimizations, the optimum comprehensive performances of the hardened layer were as follows: plasma arc current is 90 A, hardening speed is 22 m/min, plasma gas flow rate is 60 L/min and hardening distance is 43 mm. It concludes that GA-BP mode developed in this study provides a promising method for plasma hardening parameters prediction and optimization.
关键词:
plasma transferred arc
,
surface hardening
,
optimization
,
neural network
,
genetic algorithm
Acta Materialia
A graded microstructure was produced in the surface layer of a pure Cu sample by means of surface mechanical attrition treatment (SMAT) [Wang K, Tao NR, Liu G, Lu J, Lu K. Acta Mater 2006;54:5281.]. The diffusion behavior of (63)Ni in such a surface layer was investigated by the radiotracer technique at temperatures <438 K. It is shown that the effective diffusivity in the top 10 mu m surface layer is more than 2 orders of magnitude higher than that along conventional high-angle grain boundaries (HAGB) in Cu of similar purity. The diffusion rate increases gradually with increasing depth up to 30-50 mu m, and then decreases with further increasing depth. The enhanced diffusivities reveal higher-energy states of various interfaces in the SMAT surface layer. The excess free energy of HAGB in this layer is estimated to be similar to 30% higher than that of conventional grain boundaries. An apparent retardation of the effective diffusion rate in the top 25 mu m surface layer is induced by tracer leakage into numerous twin-boundary-like interfaces, while the gradual decrease in interface excess free energy correlates with the observed decrease in diffusivity in the subsurface layer at depths exceeding 50 mu m. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
关键词:
Nanostructured material;Surface mechanical attrition treatment;Diffusion;Grain boundaries;Twin boundaries;grain-boundary diffusion;mechanical attrition treatment;severe;plastic-deformation;nanocrystalline copper;self-diffusion;nickel;alloys;bulk;temperatures;segregation
刘守平
,
周上祺
,
王佳眉
,
任勤
腐蚀学报（英文）
用金相显微镜、扫描电镜、X射线衍射仪和X射线能谱仪对天然气井油管悬挂器腐蚀失效进行了检测分析，并对天然气井油管悬挂器用35CrMo钢进行了盐雾试验，结果表明，天然气中的水和CO2是引起腐蚀的主要介质，腐蚀产物主要是FeCO3，高速天然气冲刷和钢中的非金属夹杂加剧了腐蚀的速度.
CORROSION FAILURE ANALYSIS OF AN OIL TUBE USED IN NATURAL GAS WELL
LIU Shou-ping,ZHOU Shang-qi,WANG Jia-mei,REN Qin
Chongqing University
A failed oil tube used in natural gas well was examined by optical microscope,scanning electron microscope ,X-ray diffractometer and X-ray spectrometer.Corrosion behavior of 35CrMo steel samples of the oil tube were investigated by means of salt spray tests in the laboratory.The results show that CO2 and H2O are primary factors in the corrosion of oil tube.The corrosion product is FeCO3,non-metallic inclusions in the steel and erosion of natural gas fluid played an important role in accelerating the corrosion.
oil tube;
natural gas well；
35CrMo steel；
failure analysis；
corrosion
关键词:
悬挂器
,
null
,
null
,
null
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
徐卫兵
,
戈明亮
,
何平笙
应用化学
doi:10.3969/j.issn.1000-0518.2001.09.011
用熔融插层法制备聚甲醛/蒙脱土纳米复合材料,用X射线衍射研究聚甲醛及复合材料的微观结构,表明复合材料是纳米复合材料.用DSC法研究其非等温结晶行为,对所得数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚甲醛及聚甲醛/有机蒙脱土纳米复合材料的结晶活化能分别为334.6和196.9 kJ/mol,说明有机蒙脱土的加入,降低了聚甲醛的结晶活化能,且t1/z缩短,起到了异相成核的作用.
关键词:
聚甲醛
,
蒙脱土
,
纳米复合材料
,
非等温结晶动力学
王平华
,
徐国永
应用化学
doi:10.3969/j.issn.1000-0518.2004.08.007
用熔融复合法制备聚丙烯/凹凸棒土纳米复合材料,用DSC法研究其非等温结晶行为,对所得的数据分别用Jeziorny法、Ozawa法和Liu法进行处理.结果表明,Jeziorny法和Liu法处理非等温结晶过程比较理想.聚丙烯及聚丙烯/凹凸棒土纳米复合材料的结晶活化能分别为194.1和162.8 kJ/mol,表明凹凸棒土的加入,降低了聚丙烯的结晶活化能,且t1/2缩短,起到了异相成核作用.
关键词:
聚丙烯
,
凹凸棒土
,
纳米复合材料
,
非等温结晶动力学
材料科学技术（英文）
The effect of interstitial hydrogen on the cohesion of the Al Sigma=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.
关键词:
hydrogen;grain boundary;Al-Mg alloys;pseudopotentials;1st-principles
Xiaoguang LIU
,
Xiaowei WANG
材料科学技术（英文）
The effect of interstitial hydrogen on the cohesion of the Al ∑=11(113) grain boundary (GB) is investigated based on the thermodynamic model of Rice-Wang using the first-principles density function calculation. The results indicate that interstitial H behaves as an embrittler from "strengthening energy" analysis. The reduced GB cohesion due to the presence of H at the GB is attributed to the low affinity between H and Al, and the weakened bonding of Al atomic pairs perpendicular to GB plane.
关键词:
Hydrogen
,
null
,
null
