WU Long
,
PEI Fen
,
CHEN Yu
,
LI Shi-qi
钢铁研究学报(英文版)
Abstract： CaO-Al2O3-SiO2-CaF2-MgO was selected as the slag system for desulfurization in LF process. The reaction between steel and slag during desulfurization has been simulated by using Factsage software to study the influence of component on the sulfur distribution ratio. In order to research the influence of CaO content, aluminum powder content and its granularity on desulfurization, laboratory experiments have been carried out in a 200 kg inductive furnace. Results showed that the optimal composition of deep desulfurizer is wCaO=64% and aluminium powder 10% with a granularity of 30 μm. Industrial trials showed that the main composition range of final slag in LF process is wCaO=530%-570%, wAl2O3=234%-251%, wSiO2=81%-100%, and wCaF2=32%-47%. The sulfur mass percent in steel is lower than 00008% with a desulfurization rate above 89%. According to the result of industrial production, this desulfurizer could meet the production requirement for ultra-low sulfur steel, of which sulfur mass percent is under 00015%.
关键词:
Key words: refining slag
,
deep-desulfurization
,
sulfur distribution ratio
,
desulfurization rate
李铂
,
周建江
,
夏伟杰
,
吴连慧
液晶与显示
doi:10.3788/YJYXS20142904.0605
直线是机载座舱显示画面中最基本的图元,其显示质量对于整个画面的显示效果影响较大,尤其是小角度下直线显示的“麻花”现象一直是影响显示效果的关键问题之一.为了提高小角度下直线的显示效果,本文提出了一种基于Wu算法的亮度渐变改进算法.该算法通过渐进地展现直线从轴方向上的亮度变化过程,减少亮度畸变,有效地改进了显示效果.通过Matlab仿真和FPGA实现,验证了该算法反走样后的小角度直线显示效果明显优于其他算法,而且结合中点画线法后,绘制时间与Wu算法相当.同时该算法还可改善大角度直线和圆弧的显示效果,消除了大角度直线的边缘锯齿,解决了圆弧在小角度部分的虚化问题.因此本文算法可用于对实时性和显示效果要求高的机载座舱显示系统,以缓解飞行员的视觉疲劳.
关键词:
座舱显示
,
反走样
,
改进Wu算法
,
小角度
,
FPGA实现
吴连慧
,
周建江
,
夏伟杰
,
陈雅雯
液晶与显示
doi:10.3788/YJYXS20153001.0163
对于光栅化的三角形,其边缘存在明显的锯齿现象,因此需要进行反走样处理.基于Wu直线反走样算法的思想,考虑了水平直线外侧直接添加插值点的算法和三角形三边外侧反走样的算法.综合两者的优点,在绘制光栅化的三角形的同时,边缘叠加Wu反走样直线,并考虑背景像素灰度值的作用.结果表明,改进的三角形光栅化的边缘反走样算法有效提高了三角形光栅化后边缘的显示效果,该算法计算量小,便于FPGA实现,可用于对图形显示质量要求很高的机载显示系统.
关键词:
反走样
,
Wu算法
,
光栅化
,
FPGA
胡跃鑫
,
冯玉林
,
姜伟
应用化学
doi:10.3724/SP.J.1095.2011.00521
采用不同尺寸的碳酸钙粒子增韧高密度聚乙烯,研究了不同温度下共混体系的临界粒子间距与碳酸钙粒子尺寸和含量之间的关系,确定了温度是Wu氏增韧理论临界粒子间判据适用性的重要影响因素.结果表明,在17℃下,临界粒子间距与碳酸钙粒子的尺寸和含量无关,该条件下Wu氏增韧理论临界粒子间距判据是适用的;而随着温度的升高,发现临界粒子间距依赖于碳酸钙粒子的尺寸,表明高温条件下,Wu氏增韧理论临界粒子间距判据不再适用.
关键词:
聚合物增韧
,
粒子间距
,
脆韧转变
Physical Review B
Longitudinal electron transport is investigated for a long-period semiconductor superlattice in the presence of a magnetic field applied along the growth direction of the superlattice. It is shown that the longitudinal magnetoresistance exhibits a complicated dependence on the magnetic-field strength. In contrast with the conventional Shubnikov-de Haas oscillations, the magnetoresistance shows periodic oscillations only in the region of low reciprocal magnetic field.
关键词:
magnetoresistance
F.M.Chu David P.Pope Dept.of Materials Science and Engineering
,
University of Pennsylvania
,
Philadelphia
,
PA 19104
,
USA
材料科学技术（英）
In this paper the geometric description and general theory of mechanical twinning are reviewed, the twins in general lattices and superlattices are summarized, and the kinetic process by which mechanical twins form is revisited. A case study of mechanical twinning of HfV2+Nb, (cubic) Laves phase, is presented and the synchroshear of selected atomic layers is proposed to explain the physical process of twin formation. If the twins form in this way, then long shear vectors and / or atomicshuffles are not really necessary.
关键词:
twin
,
null
,
null
,
null
J.M. Gong
,
S.T. Tu
,
J. Xia and X. Ling (School of Mechanical Engineering
,
Nanjing University of Chemical Technology
,
Nanjing 210009
,
China)
金属学报(英文版)
Creep deformation localization is generally found in structures at high temperamture,typically in weldments. As the heat affected zone (HAZ) in a weldment is very narrow, deformation in HAZ region can hardly be measured by conventional displacement gauge. A new method for measuring long-term local creep deformation was developed by quartz optical fiber and technique of digital image analysis. The creep deformations of base metal, weld metal and HAZ in weldments are thereby determined with crossweld specimens.
关键词:
creep deformation
,
null
,
null
,
null
材料科学技术（英）
A new type of long periodic structure has been found in ZrO2-Y2O3 ceramics in annealed states. High resolution electron microscopy (HREM), selected area electron diffraction, and computer simulation have been used to reveal the presence of the long periodic structure. The unit cell of the long periodic structure consists of a cubic ZrO2 unit cell and L1(0)- like phase one.
关键词:
ceramics;electron diffraction;electron microscopy;crystal structure;microstructure
Jiancun RAO
,
Yu ZHOU
,
Douxing LI
材料科学技术（英）
A new type of long periodic structure has been found in ZrO2-Y2O3 ceramics in annealed states. High resolution electron microscopy (HREM), selected area electron diffraction, and computer simulation have been used to reveal the presence of the long periodic structure. The unit cell of the long periodic structure consists of a cubic ZrO2 unit cell and L10- like phase one.
关键词:
Ceramics
,
null
,
null
,
null
,
null
