{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"采用多种材质料钵的不同粉碎机进行不同粒度或不同粉碎时间制备试样,检测试样中<span style=\"color:red\">钒</span>、料钵材质的特征元素和氧成分含量并分别计算它们的变化量,找到了料钵材质磨粉、空气中氧共同对试样的不同程度污染是导致<span style=\"color:red\">钒</span>含量偏低的原因.根据<span style=\"color:red\">破碎</span>机性能,选配制样设备并确定样品<span style=\"color:red\">破碎</span>粒度控制点,经试验确定制样方法的样品缩分K值为0.02.采取选用粉碎能力强且料钵材质耐磨性能较好的振动粉碎机粉碎样品、严格控制试样粒度、限时粉碎等措施,以减少污染.实验方法是先将原样用颚式<span style=\"color:red\">破碎</span>机<span style=\"color:red\">破碎</span>至粒度-10 mm,混匀后缩分留不少于2.0 kg样品,再颚式<span style=\"color:red\">破碎</span>至-5 mm,混匀后缩分留不少于0.5 kg样品;然后限时振动粉碎至-1.0 mm,混匀后缩分留不少于50 g样品;最后限时振动粉碎至分析试样粒度-0.250mm.实验方法对<span style=\"color:red\">不易破碎</span>的FeV50、FeV80的制样精确度(<span style=\"color:red\">钒</span>含量)βD分别为0.23、0.31,试样测定精确度βM分别为0.18、0.19,对6 kg大样制备成试样的时间为14 min.","authors":[{"authorName":"陈荣庆","id":"9fc6e4f8-7b16-4e58-bd14-6f8dbb71708d","originalAuthorName":"陈荣庆"},{"authorName":"张永刚","id":"6470fd0e-829c-47aa-9e11-48aae0830613","originalAuthorName":"张永刚"},{"authorName":"羊绍松","id":"faedde74-d056-49ba-bdd9-20b1d0091e27","originalAuthorName":"羊绍松"},{"authorName":"罗萍","id":"5a9c7a82-7831-4c17-aaf1-35b38daf1c69","originalAuthorName":"罗萍"}],"doi":"10.13228/j.boyuan.issn1000-7571.009801","fpage":"40","id":"19957e2a-ffc2-4498-b050-41fa0815418a","issue":"6","journal":{"abbrevTitle":"YJFX","coverImgSrc":"journal/img/cover/YJFX.jpg","id":"71","issnPpub":"1000-7571","publisherId":"YJFX","title":"冶金分析   "},"keywords":[{"id":"f307386d-c977-493b-983f-64ca348b12f4","keyword":"<span style=\"color:red\">不易破碎</span><span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>","originalKeyword":"不易破碎钒铁"},{"id":"7c83e763-d208-4789-8aa0-b410c5b77e45","keyword":"<span style=\"color:red\">破碎</span>机性能","originalKeyword":"破碎机性能"},{"id":"54fbb5e6-b199-4d68-bd51-e6f1161b3137","keyword":"料钵材质磨粉","originalKeyword":"料钵材质磨粉"},{"id":"11ac8d13-b9ae-4c6e-875a-5502bbed2ab9","keyword":"氧","originalKeyword":"氧"},{"id":"86f1eb4d-3dc6-44c1-bde5-5761a10edc23","keyword":"污染试样","originalKeyword":"污染试样"},{"id":"32d35e02-1979-491f-a36c-04b4d5585c74","keyword":"制样方法","originalKeyword":"制样方法"}],"language":"zh","publisherId":"yjfx201606008","title":"<span style=\"color:red\">不易破碎</span><span style=\"color:red\">钒</span>铁制样方法探讨","volume":"36","year":"2016"},{"abstractinfo":"通过弹用燃烧合金颗粒制备实验,研究燃烧合金颗粒的形貌、制备难易程度、利用率与海绵锆中铁含量的关系.结果表明:<span style=\"color:red\">铁</span>含量直接影响燃烧合金颗粒的形貌、制备难易程度和利用率,在其他成分符合标准的前提下,<span style=\"color:red\">铁</span>含量越高,燃烧合金越<span style=\"color:red\">不易破碎</span>成所需的颗粒;<span style=\"color:red\">铁</span>含量较低时,燃烧合金容<span style=\"color:red\">易破碎</span>且颗粒形貌呈海绵状,制备的燃烧合金产品表面光洁、强度高.","authors":[{"authorName":"吕建军","id":"4e979a55-5e8e-4d29-8119-cb23e2355498","originalAuthorName":"吕建军"},{"authorName":"高平","id":"2e40729c-2202-4181-980f-e2d2f0adb969","originalAuthorName":"高平"},{"authorName":"王力杰","id":"427b2fec-96e5-4e45-a904-8c5e7dd5e5ef","originalAuthorName":"王力杰"},{"authorName":"李永峰","id":"00e119fb-2b0b-412c-bdb6-0eb638b7a8d6","originalAuthorName":"李永峰"},{"authorName":"周晶钟","id":"e5e67691-ece2-4a3d-af94-772226b33fbd","originalAuthorName":"周晶钟"},{"authorName":"张明","id":"d35f4b5e-2b3f-459d-82e7-d5106a41382e","originalAuthorName":"张明"},{"authorName":"侯永亮","id":"25353deb-3fe6-445e-a6d7-cf45043ba94a","originalAuthorName":"侯永亮"}],"doi":"","fpage":"75","id":"7ead95a2-d91b-4716-98cf-f3a8b8bc5219","issue":"5","journal":{"abbrevTitle":"BQCLKXYGC","coverImgSrc":"journal/img/cover/BQCLKXYGC.jpg","id":"4","issnPpub":"1004-244X","publisherId":"BQCLKXYGC","title":"兵器材料科学与工程   "},"keywords":[{"id":"75e84b37-6358-4f17-8e1a-020910eb7f05","keyword":"海绵锆","originalKeyword":"海绵锆"},{"id":"36d7ea37-f925-43dc-b7f2-d46699e2da5b","keyword":"燃烧合金","originalKeyword":"燃烧合金"},{"id":"3bf388f6-3840-4ab0-8c34-d1c24073df4f","keyword":"<span style=\"color:red\">铁</span>含量","originalKeyword":"铁含量"},{"id":"03095c74-5dba-4ac2-bc79-fa571e30547b","keyword":"颗粒制备","originalKeyword":"颗粒制备"},{"id":"36d1e4d8-a87e-405a-9a18-991d52da3351","keyword":"颗粒形貌","originalKeyword":"颗粒形貌"}],"language":"zh","publisherId":"bqclkxygc201505021","title":"<span style=\"color:red\">铁</span>含量对弹用燃烧合金颗粒制备的影响","volume":"38","year":"2015"},{"abstractinfo":"采用650 kVA的电弧炉,探讨了两步法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>的可行性.认为:控制合适的富渣量是问题的关键.并且两步法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>能使<span style=\"color:red\">钒</span>的回收率提高到97.28%,与一步法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>相比提高约1.8%.","authors":[{"authorName":"孙朝晖","id":"e4da3fe1-dcb2-46bc-98a0-a15b950efc17","originalAuthorName":"孙朝晖"},{"authorName":"杨仰军","id":"e7d61bf1-62dc-4c32-b9ac-995dd52f31f1","originalAuthorName":"杨仰军"},{"authorName":"张帆","id":"28575375-f0ac-426f-8922-5c4acb01e2e8","originalAuthorName":"张帆"}],"doi":"","fpage":"1","id":"a4f6a138-f0d8-4bba-8814-e06949e81c20","issue":"1","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"83cc201d-17d2-417b-bb04-5b0e19462f76","keyword":"<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>","originalKeyword":"钒铁"},{"id":"5196f87a-1c55-4c72-b65c-8b21cd46cc72","keyword":"电弧炉","originalKeyword":"电弧炉"},{"id":"17d24b76-3124-4f2b-aacb-0d54d2a393e6","keyword":"两步法","originalKeyword":"两步法"},{"id":"1421c8a9-dfd8-41c7-b2dc-95bcf50c1514","keyword":"富渣","originalKeyword":"富渣"}],"language":"zh","publisherId":"gtft201001001","title":"两步法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>技术探讨","volume":"31","year":"2010"},{"abstractinfo":"分析了攀宏公司高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼炉渣的特点,对高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼的炉渣形态进行了初步探讨,研究了高<span style=\"color:red\">钒</span>铁炉渣一些理化性能对冶炼工艺参数、冶炼技术经济指标的影响.","authors":[{"authorName":"王永刚","id":"c3514ab0-831f-4690-8e49-fff1b131939e","originalAuthorName":"王永刚"},{"authorName":"杨烽","id":"63abf6a2-d413-40eb-b0ee-ab5699d90e58","originalAuthorName":"杨烽"},{"authorName":"张建辉","id":"99c4420c-9035-4e01-9d9d-7fb39c937964","originalAuthorName":"张建辉"}],"doi":"10.3969/j.issn.1004-7638.2002.01.005","fpage":"21","id":"4efb754b-d0c1-4f00-a2ab-5883105932e1","issue":"1","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"9216f5a8-96e9-4d68-a483-6d8807da2283","keyword":"高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>","originalKeyword":"高钒铁"},{"id":"5bbc9170-29d5-4513-bc36-9342182a658e","keyword":"炉渣","originalKeyword":"炉渣"},{"id":"4c4800a5-0f77-4e3f-8637-76908ecbc223","keyword":"组成","originalKeyword":"组成"},{"id":"c5aed7d5-dcca-4097-a24b-92d01297c9d6","keyword":"理化性能","originalKeyword":"理化性能"}],"language":"zh","publisherId":"gtft200201005","title":"高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼的渣态研究","volume":"23","year":"2002"},{"abstractinfo":"为回收利用<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼的贫渣和处理还原沉<span style=\"color:red\">钒</span>后的废水,将<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼过程中产生的贫渣经过风化、筛分粒度小于5 mm后获得贫渣灰,将其代替石灰粉末处理提<span style=\"color:red\">钒</span>过程中还原沉<span style=\"color:red\">钒</span>后的废水,pH值控制在7.0 ～8.5.结果表明:废水中每公斤铬消耗贫渣灰9.2kg,为石灰粉末用量的1.4倍,外排废水总铬小于1.5 mg/L,总<span style=\"color:red\">钒</span>小于1 mg/L,SS小于70 mg/L,pH值6～9,处理后的废水符合<span style=\"color:red\">钒</span>工业污染物排放标准GB26452-2011排放限值.以年产<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>(FeV50)2 000 t计,每年可减少<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼废渣排放量3000t以上.","authors":[{"authorName":"庄立军","id":"7c66e99f-01b2-4788-8089-aa7b23563eb3","originalAuthorName":"庄立军"},{"authorName":"王良","id":"120ff818-5516-455e-b6d7-d78ce3ac4b7b","originalAuthorName":"王良"},{"authorName":"赵华","id":"4e3f4eec-c6e4-428c-b789-f7402623ca7a","originalAuthorName":"赵华"},{"authorName":"滕晓慧","id":"8c16b2d7-28c4-4f92-8cd5-28dfa40a5675","originalAuthorName":"滕晓慧"},{"authorName":"马锦红","id":"ce6a1fca-5f2c-4e2d-ab01-863ddd1c2c10","originalAuthorName":"马锦红"}],"doi":"10.7513/j.issn.1004-7638.2014.01.013","fpage":"64","id":"96e2e415-d94e-4aab-b40c-896ac83112e4","issue":"1","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"8b2ea45c-e580-479c-8e0d-08152081c42b","keyword":"<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼","originalKeyword":"钒铁冶炼"},{"id":"6b2c2900-048f-4c33-b8e1-f2019902d2b8","keyword":"贫渣","originalKeyword":"贫渣"},{"id":"0a5c232c-1b3e-46e7-922f-58ec3057f43d","keyword":"沉<span style=\"color:red\">钒</span>废水","originalKeyword":"沉钒废水"},{"id":"bda5ba8b-7994-444d-b80a-21b28a52106b","keyword":"还原","originalKeyword":"还原"},{"id":"cd41cf60-1092-43f8-9b50-9169fbb315eb","keyword":"六价铬","originalKeyword":"六价铬"},{"id":"72234626-38a6-474e-b56c-d1aaaca56127","keyword":"中和沉淀","originalKeyword":"中和沉淀"}],"language":"zh","publisherId":"gtft201401013","title":"用<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼贫渣处理还原沉<span style=\"color:red\">钒</span>后的废水","volume":"35","year":"2014"},{"abstractinfo":"以VzO5为原料,铝粒为还原剂,采用炉外法还原制取了高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>,并对工艺参数进行了研究,达到了提高<span style=\"color:red\">钒</span>回收率的目的.研究结果表明,高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>的回收率随还原剂铝用量的增加而增大,其用量以过量2％(质量分数,下同)为宜.分别试验了3种不同的精炼剂(纯铝粒、铝硅铁合金和铝钙铁合金)对<span style=\"color:red\">钒</span>回收率的影响,发现以AlCaFe作为精炼剂,<span style=\"color:red\">钒</span>的回收率明显增加,是较好的精炼剂.铝热法生产高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>时,铝粒的合适粒度为3～4 mm.","authors":[{"authorName":"郑溪娟","id":"76018638-70a7-4226-a508-cdae9edfc916","originalAuthorName":"郑溪娟"},{"authorName":"彭可武","id":"4697c116-9ae9-48bf-b785-68d4c137cf64","originalAuthorName":"彭可武"},{"authorName":"蒲年文","id":"c424ca81-c3c0-4bda-a311-524cfcfeb195","originalAuthorName":"蒲年文"},{"authorName":"马贺利","id":"37b5755b-eabe-4d8a-90d9-7c2bcd7dd54d","originalAuthorName":"马贺利"},{"authorName":"施虎","id":"97d8c2a0-d440-4165-8018-23f7d2abb9d6","originalAuthorName":"施虎"}],"doi":"","fpage":"6","id":"11bb9379-4a4a-4337-9381-dbf4fb4278e6","issue":"9","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"bd49bf88-1247-431d-8e9b-83b273fe3fd5","keyword":"炉外法","originalKeyword":"炉外法"},{"id":"51c3a1a2-8117-4c99-b270-28d0e64f64e5","keyword":"高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>","originalKeyword":"高钒铁"},{"id":"5c15f3c4-cb7f-4a62-a379-ed6da8a06af2","keyword":"铝热法","originalKeyword":"铝热法"},{"id":"7af699ec-f482-4b64-8ac2-56443ea23fa7","keyword":"精炼剂","originalKeyword":"精炼剂"}],"language":"zh","publisherId":"gtyjxb201209002","title":"炉外法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>的工艺参数","volume":"24","year":"2012"},{"abstractinfo":"以V2O5为原料，铝粒为还原剂，采用炉外法还原制取了高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>，并对工艺参数进行了研究，达到了提高<span style=\"color:red\">钒</span>回收率的目的。研究结果表明，高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>的回收率随还原剂铝用量的增加而增大，其用量以过量2%(质量分数，下同)为宜。分别试验了3种不同的精炼剂(纯铝粒、铝硅铁合金和铝钙铁合金)对<span style=\"color:red\">钒</span>回收率的影响，发现以AlCaFe作为精炼剂，<span style=\"color:red\">钒</span>的回收率明显增加，是较好的精炼剂。铝热法生产高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>时，铝粒的合适粒度为3~4mm。","authors":[{"authorName":"郑溪娟，彭可武","id":"f875a826-4d3e-4574-b658-b0be7ea9af6e","originalAuthorName":"郑溪娟，彭可武"},{"authorName":"，蒲年文，马贺利，施虎","id":"2c6d5cf0-c344-4695-ac85-50ad9438a6fb","originalAuthorName":"，蒲年文，马贺利，施虎"}],"categoryName":"|","doi":"","fpage":"6","id":"9f1849b7-e06a-417d-bb7c-b51ffc76c14e","issue":"9","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"660a43f8-3746-4ee7-a11f-5a357b42111e","keyword":"炉外法 ","originalKeyword":"炉外法 "},{"id":"8b264c5c-fb62-44fb-8c1d-9662ab276d0a","keyword":" high vanadium ferrovanadium ","originalKeyword":" high vanadium ferrovanadium "},{"id":"2f3e7601-c02d-4389-b800-87e5d7d4cd30","keyword":" thermite method ","originalKeyword":" thermite method "},{"id":"11671268-6f9d-4cd9-a5ae-c8ac24efa525","keyword":" refine agent","originalKeyword":" refine agent"}],"language":"zh","publisherId":"1001-0963_2012_9_11","title":"炉外法冶炼高<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>的工艺参数","volume":"24","year":"2012"},{"abstractinfo":"高铬型<span style=\"color:red\">钒</span>渣钠化焙烧-水浸-沉<span style=\"color:red\">钒</span>后获得了酸性铬溶液,为了生产合格的铬化工产品,必须除去其中的<span style=\"color:red\">钒</span>.采用硫酸<span style=\"color:red\">铁</span>为除<span style=\"color:red\">钒</span>试剂,研究了铁盐加入量、反应温度和pH值等因素对除<span style=\"color:red\">钒</span>效率的影响.结果表明,当铁盐添加量为9(以Fe/V摩尔比计)、反应温度80℃、反应终点pH为6～7时,除<span style=\"color:red\">钒</span>率可达97％,铬溶液中残留<span style=\"color:red\">钒</span>浓度小于0.08 g/L,铬损失率小于3.7％,能够满足后续生产重铬酸钠或三氧化二铬产品的要求.","authors":[{"authorName":"李信","id":"5e40a41d-ded7-4e55-83ec-b8e89839f180","originalAuthorName":"李信"},{"authorName":"李明","id":"2c5138b8-4ccf-43cb-8bcd-4d527018f608","originalAuthorName":"李明"},{"authorName":"梁斌","id":"fe3d7789-6922-4247-b02e-9fd3ddc905ab","originalAuthorName":"梁斌"}],"doi":"10.7513/j.issn.1004-7638.2016.04.004","fpage":"20","id":"7951147e-5e36-48c5-b201-9d19e0790d49","issue":"4","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"4c60b7c4-22cf-45b9-9e0a-a300993a99d3","keyword":"<span style=\"color:red\">钒</span>铬溶液","originalKeyword":"钒铬溶液"},{"id":"7c9bc44e-8a1e-466f-92a1-920cd5a2ed2b","keyword":"铬产品","originalKeyword":"铬产品"},{"id":"296f1c33-d490-4653-b71b-3577a071c10c","keyword":"硫酸<span style=\"color:red\">铁</span>","originalKeyword":"硫酸铁"},{"id":"d600e0a7-0054-4d43-9493-57e69f4a1bdd","keyword":"除<span style=\"color:red\">钒</span>","originalKeyword":"除钒"},{"id":"a8ce17fc-1bee-4a71-92e5-c33b8d26e728","keyword":"吸附","originalKeyword":"吸附"}],"language":"zh","publisherId":"gtft201604004","title":"利用硫酸<span style=\"color:red\">铁</span>除去沉<span style=\"color:red\">钒</span>后酸性铬溶液中<span style=\"color:red\">钒</span>的试验研究","volume":"37","year":"2016"},{"abstractinfo":"研究了适用于倾翻炉一步法和两步法<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼过程混合<span style=\"color:red\">钒</span>氧化物铝热反应的冶炼特性.考察不同<span style=\"color:red\">钒</span>氧化物配比、不同配铝系数对渣中<span style=\"color:red\">钒</span>损及单炉冶炼效率的影响.结果表明:V2O3的增加能够有效降低平衡态渣中<span style=\"color:red\">钒</span>含量,但不利于提高单炉冶炼效率,原料配比(罐数比)从0∶8提高到6∶2时,渣中<span style=\"color:red\">钒</span>含量从2.23％降低至1.85％,单炉渣量减少19.7％,单炉冶炼时间从180 min增加到194 min;两步法冶炼过程中,随着配铝系数提高到1.20,贫渣<span style=\"color:red\">钒</span>含量从一步法<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼的1.85％降低至0.44％,渣中平均<span style=\"color:red\">钒</span>含量降低至0.88％;贫渣时间从194 min减少至146m in,精炼时间则从0增加到94 min,单炉冶炼周期较一步法延长46 min;最优试验条件下,合金产品中<span style=\"color:red\">钒</span>含量提高到51.6％,铝含量降低到低于0.3％的水平,在提高合金品质的同时也提高了铝的利用率.","authors":[{"authorName":"余彬","id":"f5761c00-82c2-4747-9490-bab26708f2f5","originalAuthorName":"余彬"},{"authorName":"鲜勇","id":"5adfacff-34c2-4033-8934-ed721fe0abc5","originalAuthorName":"鲜勇"},{"authorName":"孙朝晖","id":"6f744c4b-a268-4246-b57e-533513f5ed3a","originalAuthorName":"孙朝晖"},{"authorName":"景涵","id":"f42f1a0f-2e39-4c33-bd96-1e24a5b1e9c4","originalAuthorName":"景涵"},{"authorName":"唐红建","id":"dd9d617a-2958-471e-81a6-5099823f1b22","originalAuthorName":"唐红建"},{"authorName":"杜光超","id":"03e1d51d-e4b9-40ee-a6d0-014d013324d9","originalAuthorName":"杜光超"}],"doi":"10.7513/j.issn.1004-7638.2015.04.001","fpage":"1","id":"ffa06c77-2b8e-46f1-83ff-811c45a2c09c","issue":"4","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"3e8081a0-16ea-4d3d-b041-60ec48d58d5f","keyword":"混合<span style=\"color:red\">钒</span>氧化物","originalKeyword":"混合钒氧化物"},{"id":"be691ff6-3c2e-4422-85ba-b501b4975261","keyword":"倾翻炉","originalKeyword":"倾翻炉"},{"id":"34d914b4-b439-4487-bdb2-15296c907eb8","keyword":"两步法","originalKeyword":"两步法"},{"id":"5ea6e826-5673-4878-9c03-98e277ebdd14","keyword":"<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼","originalKeyword":"钒铁冶炼"}],"language":"zh","publisherId":"gtft201504001","title":"混合<span style=\"color:red\">钒</span>氧化物倾翻炉<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>冶炼工艺研究","volume":"36","year":"2015"},{"abstractinfo":"采用具备顶底复吹功能的500 kg中频感应炉模拟复吹转炉铁水提<span style=\"color:red\">钒</span>工艺,研究吹炼终点<span style=\"color:red\">钒</span>在渣<span style=\"color:red\">铁</span>间的分配比;运用X射线衍射分析<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>尖晶石的分子组成.试验结果表明:吹炼终点<span style=\"color:red\">钒</span>在渣<span style=\"color:red\">铁</span>间分配比Lv为1.8 ～2.8,且与渣中FeO含量相关.为了保证<span style=\"color:red\">钒</span>渣质量,降低<span style=\"color:red\">钒</span>渣中FeO含量,减少<span style=\"color:red\">铁</span>损,吹炼终点V的质量分数不宜过低.<span style=\"color:red\">钒</span>渣中<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>尖晶石的分子式为FeO(Fe,V)2O3,表明<span style=\"color:red\">钒</span>渣中<span style=\"color:red\">钒</span>为+3价.吹炼初期<span style=\"color:red\">钒</span>渣中存在少量+2价<span style=\"color:red\">钒</span>,随着供氧量增加,+2价<span style=\"color:red\">钒</span>的数量逐渐减少.","authors":[{"authorName":"刘质斌","id":"4dda2618-dbb8-430c-83cb-681d2859eb3a","originalAuthorName":"刘质斌"},{"authorName":"张曦东","id":"92bc3f04-ff97-48ae-ae0b-b2c106e1f552","originalAuthorName":"张曦东"},{"authorName":"马登","id":"40baed82-c5c9-45f7-9cbe-9d38e6fb4074","originalAuthorName":"马登"},{"authorName":"赵斌","id":"a5033880-5512-4b9f-bd64-b709ad409150","originalAuthorName":"赵斌"},{"authorName":"吴巍","id":"97b08f90-e0d8-4f70-ae32-ebbaa532868d","originalAuthorName":"吴巍"}],"doi":"10.7513/j.issn.1004-7638.2016.04.005","fpage":"25","id":"9318459c-319d-4f4f-bb15-e8c88af5aefb","issue":"4","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"7d1805d5-6847-423e-95eb-05b70afa9e37","keyword":"高<span style=\"color:red\">钒</span>铁水","originalKeyword":"高钒铁水"},{"id":"751455dc-1b9f-4c6d-9ad8-71f6835962bf","keyword":"<span style=\"color:red\">钒</span>分配比","originalKeyword":"钒分配比"},{"id":"d3f223dd-3b99-4cbf-9f45-957fac4c4471","keyword":"<span style=\"color:red\">钒</span>渣","originalKeyword":"钒渣"},{"id":"6e620132-d905-48c5-b0fd-9a2e7e3783de","keyword":"<span style=\"color:red\">钒</span><span style=\"color:red\">铁</span>尖晶石","originalKeyword":"钒铁尖晶石"}],"language":"zh","publisherId":"gtft201604005","title":"吹炼终点<span style=\"color:red\">钒</span>在渣<span style=\"color:red\">铁</span>间的分配比及相分析","volume":"37","year":"2016"}],"totalpage":1358,"totalrecord":13579}