{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"采用热分解法在钛基体上制备钌铱锡金属氧化物阳极,通过SEM、EDX、循环伏安、电化学阻抗谱及强化电解寿命试验等测试方法,探求不同海水温度对于钌铱锡金属氧化物阳极强化电解失效行为的影响规律.结果表明:在5～20℃海水温度条件下,阳极寿命短,失效阳极的中心区域存在少量残余涂层,呈现龟裂状形貌,而边缘地带Ti基体基本暴露,涂层发生局部电化学溶解或剥落;当海水电解温度为40℃时,阳极寿命较长,阳极涂层发生均匀电化学溶解.另外,随着海水温度的升高,阳极电化学活性表面积增大,稳定性逐渐提高.5～20℃条件下阳极失效主要是由于.Ru组元的选择性溶解和涂层局部剥落导致,而40℃条件下涂层也发生电化学溶解,但TiO2钝化膜的形成是引起阳极失效的主要原因.","authors":[{"authorName":"<span style=\"color:red\">张</span><span style=\"color:red\">胜</span><span style=\"color:red\">健</span>","id":"87e2762c-fd6b-4d19-a170-1bc3ee99a0ca","originalAuthorName":"张胜健"},{"authorName":"杜爱玲","id":"674caa6f-b5cb-4a96-9e24-8ee3f14691d8","originalAuthorName":"杜爱玲"},{"authorName":"许立坤","id":"361c4840-8da7-45b4-ad14-0b3cb3d9fcc2","originalAuthorName":"许立坤"},{"authorName":"辛永磊","id":"6bfc126f-2aad-496d-99d8-e40a973d2a35","originalAuthorName":"辛永磊"}],"doi":"","fpage":"2613","id":"2591d6b4-ea9e-4cf9-970a-f32d9b37955c","issue":"12","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"4c523a87-dcee-4204-abf9-c727b4c9df98","keyword":"海水温度","originalKeyword":"海水温度"},{"id":"2d79b575-d268-4f0c-8f4f-d9cafad877b4","keyword":"加速寿命","originalKeyword":"加速寿命"},{"id":"b0f65130-cc2f-462b-89ec-f9280b6d2a82","keyword":"金属氧化物阳极","originalKeyword":"金属氧化物阳极"},{"id":"640a9910-2ee8-4f5e-b16f-732394f47e12","keyword":"失效机理","originalKeyword":"失效机理"}],"language":"zh","publisherId":"xyjsclygc201312039","title":"海水温度对金属氧化物阳极强化电解失效行为影响","volume":"42","year":"2013"},{"abstractinfo":"以南京化学工业园的土壤为研究对象，分析土壤中重金属 Cr （Ⅵ）和 Pb 对赤子爱<span style=\"color:red\">胜</span>蚓（ Eisenia fetida）生长及繁殖的影响．结果表明，与对照组比较，暴露28 d时，较低浓度的Cr（Ⅵ）（4—8 mg·kg－1）和Pb （1000—1500 mg·kg－1）能促进赤子爱<span style=\"color:red\">胜</span>蚓的生长发育，而较高浓度的 Cr （Ⅵ）（32—64 mg·kg－1）和 Pb （3000 mg·kg－1）则显著抑制赤子爱<span style=\"color:red\">胜</span>蚓的生长发育；赤子爱<span style=\"color:red\">胜</span>蚓的产茧量随着Cr（Ⅵ）和Pb浓度的升高被显著抑制，其中，Cr（Ⅵ）抑制赤子爱<span style=\"color:red\">胜</span>蚓产茧量的EC50（半数有效浓度）、NOEC（无观察效应浓度）和LOEC（最低观察效应浓度）分别为22．86（20．56—25．42）、8、16 mg·kg－1．Pb抑制赤子爱<span style=\"color:red\">胜</span>蚓产茧量的EC50、NOEC和LOEC分别为2280．34（2200．90—2362．65）、1500、2000 mg·kg－1；与人工土壤中Cr（Ⅵ）和Pb对赤子爱<span style=\"color:red\">胜</span>蚓产茧量的28 d?EC50有显著性差异．","authors":[{"authorName":"王婉华","id":"56c0256b-8e9d-4416-8d00-2edbe16d5059","originalAuthorName":"王婉华"},{"authorName":"陈丽红","id":"82c06f44-bbd1-47d7-85ac-e87161293dd9","originalAuthorName":"陈丽红"},{"authorName":"刘征涛","id":"34013e0e-300a-47a1-9070-633565d7f135","originalAuthorName":"刘征涛"},{"authorName":"王晓南","id":"9861afea-5b8b-4eab-b0f2-a88f572fde40","originalAuthorName":"王晓南"},{"authorName":"<span style=\"color:red\">张</span>聪","id":"e3e42c92-bd94-4515-a584-20f19a33f6a7","originalAuthorName":"张聪"}],"doi":"10.7524/j.issn.0254-6108.2015.10.2015042102","fpage":"1839","id":"eb7346f9-7a48-4866-8f84-f151fae42a9a","issue":"10","journal":{"abbrevTitle":"HJHX","coverImgSrc":"journal/img/cover/HJHX.jpg","id":"43","issnPpub":"0254-6108","publisherId":"HJHX","title":"环境化学   "},"keywords":[{"id":"22c25278-6ff3-4289-b46c-6d39e0877541","keyword":"Cr(Ⅵ)","originalKeyword":"Cr(Ⅵ)"},{"id":"8e5f019a-d464-4d25-9be2-62079ccad618","keyword":"Pb","originalKeyword":"Pb"},{"id":"b2ec3ebf-4267-4f92-9cdd-8b75ddd0d149","keyword":"南京土壤","originalKeyword":"南京土壤"},{"id":"01cbdd03-6b43-436d-a903-aa16fb01de6a","keyword":"人工土壤","originalKeyword":"人工土壤"},{"id":"7d8797cd-ca53-4118-8f3f-8ab316810eac","keyword":"赤子爱<span style=\"color:red\">胜</span>蚓","originalKeyword":"赤子爱胜蚓"},{"id":"145126d8-eb5f-4534-a3db-377047f31d87","keyword":"生长","originalKeyword":"生长"},{"id":"644ae44e-0c0d-470a-9a2d-90e245c9dc5f","keyword":"繁殖","originalKeyword":"繁殖"}],"language":"zh","publisherId":"hjhx201510011","title":"重金属铬（Ⅵ）和铅对南京土壤中赤子爱<span style=\"color:red\">胜</span>蚓生长及繁殖的影响?","volume":"","year":"2015"},{"abstractinfo":"针对四川德<span style=\"color:red\">胜</span>集团钢铁有限公司烧结厂使用较高比例的钒钛磁铁精矿的烧结生产情况,通过实验室烧结杯试验,研究了钒钛磁铁精矿配比和碱度对烧结矿烧结性能的影响.研究结果表明:在目前德<span style=\"color:red\">胜</span>钢铁有限公司的原、燃料和配矿结构条件下,要保证烧结矿产质量、节能和降低原料成本,合适的钒钛磁铁精矿配比为45％,合适的碱度为2.3.","authors":[{"authorName":"杜长坤","id":"71207eb7-7c44-4ad7-bbc6-3b5331bdce10","originalAuthorName":"杜长坤"},{"authorName":"麦吉昌","id":"176ece82-db5d-43ee-951e-885605216a77","originalAuthorName":"麦吉昌"},{"authorName":"罗清明","id":"d75de00f-6fa2-4cf6-844c-965e2d260fdd","originalAuthorName":"罗清明"},{"authorName":"袁晓丽","id":"85783f8b-bac1-4fe4-81dc-8db7e5913f3d","originalAuthorName":"袁晓丽"},{"authorName":"万新","id":"18443fa9-f656-4479-969b-a1adf34d9ef6","originalAuthorName":"万新"},{"authorName":"柳浩","id":"4bd4776c-997d-45e2-9897-7102d8dd3683","originalAuthorName":"柳浩"}],"doi":"","fpage":"62","id":"541e4510-2fd8-45c8-b778-70248ab9eb6c","issue":"2","journal":{"abbrevTitle":"GTFT","coverImgSrc":"journal/img/cover/gtft1.jpg","id":"28","issnPpub":"1004-7638","publisherId":"GTFT","title":"钢铁钒钛"},"keywords":[{"id":"1d8d842f-2629-467d-b107-3706286af20d","keyword":"钒钛精矿","originalKeyword":"钒钛精矿"},{"id":"d8746516-7b6d-44c9-896a-8f6ba7a01286","keyword":"烧结","originalKeyword":"烧结"},{"id":"4de3c226-ab42-4278-961c-c02d7c94be66","keyword":"配比","originalKeyword":"配比"},{"id":"4671657f-f33e-4625-9f42-c556b0c56919","keyword":"碱度","originalKeyword":"碱度"},{"id":"819f3dd0-b0e1-44f5-9dfb-3b1b7d5970bf","keyword":"烧结矿性能","originalKeyword":"烧结矿性能"}],"language":"zh","publisherId":"gtft201202012","title":"德<span style=\"color:red\">胜</span>川钢钒钛精矿烧结配矿试验研究","volume":"33","year":"2012"},{"abstractinfo":"在对轧制时钢管的温降原因进行分析的基础上,给出一种定<span style=\"color:red\">张</span>减温降计算模型,该模型考虑了辐射、接触传导、内部传导对温度的影响.通过对轧制实验测定得到钢管的温降数据与此模型实例计算的结果进行对比分析,表明该模型比较准确,能够满足生产实际的要求,可用于自动控制系统中定<span style=\"color:red\">张</span>减温降的计算,从而为控制系统比较准确地对轧机进行设定及调整提供依据.","authors":[{"authorName":"付国忠","id":"2df6a851-8f47-4b56-8f72-ddb7bbbcfe8c","originalAuthorName":"付国忠"},{"authorName":"刘建平","id":"7bbce9ac-9a32-45eb-96fd-189eee9a7fcf","originalAuthorName":"刘建平"},{"authorName":"赵晓峰","id":"447ac541-0f77-4dc8-b74d-90d05019a5dc","originalAuthorName":"赵晓峰"},{"authorName":"刘建明","id":"dab886da-88c3-485b-acd8-36bdef7ca181","originalAuthorName":"刘建明"},{"authorName":"吕庆功","id":"ca75c975-aa2d-40d9-a1bc-e6c2a6290dd3","originalAuthorName":"吕庆功"},{"authorName":"彭龙洲","id":"191fb78f-9fa7-4ff8-bd3d-f5d577b2254b","originalAuthorName":"彭龙洲"}],"doi":"","fpage":"51","id":"f9f1b624-57cd-4daa-8c3b-87273c5da7af","issue":"12","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"86dbadc0-1405-4493-8908-e33b69ac127a","keyword":"定<span style=\"color:red\">张</span>减","originalKeyword":"定张减"},{"id":"9e7152eb-09a1-44ea-a2de-6bbe76d243e5","keyword":"温降","originalKeyword":"温降"},{"id":"5b41b920-ede8-4551-8e68-3e12ea48cca0","keyword":"模型","originalKeyword":"模型"}],"language":"zh","publisherId":"gt200412013","title":"定<span style=\"color:red\">张</span>减温降计算模型","volume":"39","year":"2004"},{"abstractinfo":"通过对高压输电用耐<span style=\"color:red\">张</span>线夹及夹持导线的宏观形貌、化学成分、腐蚀产物进行分析,探讨了该线夹腐蚀失效的原因.结果表明:该线夹在压接时即存在铝线断股现象,服役过程中使酸性雨水更易进入到压接管内部,对线夹与钢芯铝绞线结合面进行腐蚀生成腐蚀产物,导致耐<span style=\"color:red\">张</span>线夹电阻增大;随着腐蚀的进行,线夹电阻不断增大,其温度也随之升高;当温度超过临界温度时,热平衡状态被打破,最终线夹过热,导致高温烧损失效;应加强线夹压接管位置的红外测温监控,及时更换温度明显异常的压接管.","authors":[{"authorName":"王若民","id":"67613948-e11f-48e5-825a-945647e34637","originalAuthorName":"王若民"},{"authorName":"詹马骥","id":"c5bfcec7-5a00-4e3d-b8c3-cc8ae36b1c5e","originalAuthorName":"詹马骥"},{"authorName":"季坤","id":"fad04bbc-1535-4f0d-b2d0-e0a6c3cd18b9","originalAuthorName":"季坤"},{"authorName":"严波","id":"5762aad4-1316-4f1b-a398-6bef540edc39","originalAuthorName":"严波"},{"authorName":"王夫成","id":"293d7a45-367c-4e72-b1e8-54671748e326","originalAuthorName":"王夫成"},{"authorName":"杜晓东","id":"34fa50d8-c180-4b94-bef4-334bb0b32a93","originalAuthorName":"杜晓东"}],"doi":"10.11973/jxgccl201703023","fpage":"112","id":"70c96a82-1183-4792-9903-a2d3f429c779","issue":"3","journal":{"abbrevTitle":"JXGCCL","coverImgSrc":"journal/img/cover/JXGCCL.jpg","id":"45","issnPpub":"1000-3738","publisherId":"JXGCCL","title":"机械工程材料"},"keywords":[{"id":"ba9620cc-12e4-4c4a-8ed2-dabf99baee9b","keyword":"耐<span style=\"color:red\">张</span>线夹","originalKeyword":"耐张线夹"},{"id":"e9262adb-ad1f-42ae-a53f-f8cf601c190c","keyword":"腐蚀","originalKeyword":"腐蚀"},{"id":"b1c65b70-8df7-4c01-b691-fbe881df0505","keyword":"热击穿","originalKeyword":"热击穿"},{"id":"08076d01-a062-4829-9d0a-13eb956fbedd","keyword":"钢芯铝绞线","originalKeyword":"钢芯铝绞线"}],"language":"zh","publisherId":"jxgccl201703024","title":"高压输电用耐<span style=\"color:red\">张</span>线夹失效的原因","volume":"41","year":"2017"},{"abstractinfo":"分析了宝钢1420冷轧酸轧机#机架后的测<span style=\"color:red\">张</span>辊在正常轧制中产生的划伤问题,通过对测<span style=\"color:red\">张</span>辊的表面状态、辊径、安装高度以及轴承的改进,彻底解决了因测<span style=\"color:red\">张</span>辊表面划伤而直接导致带钢表面划伤的产品质量问题.","authors":[{"authorName":"陈松","id":"49272655-146f-4cbc-84c1-2b2664d55eec","originalAuthorName":"陈松"},{"authorName":"符寒光","id":"e5d26514-5d18-4a3c-932a-02e08ffd7448","originalAuthorName":"符寒光"}],"doi":"10.3969/j.issn.1001-7208.2002.06.005","fpage":"20","id":"47514943-7c51-4f1e-bf3e-32d27788e620","issue":"6","journal":{"abbrevTitle":"SHJS","coverImgSrc":"journal/img/cover/SHJS.jpg","id":"59","issnPpub":"1001-7208","publisherId":"SHJS","title":"上海金属"},"keywords":[{"id":"31f17eb1-f1ce-4ccd-acfb-7f4cd9f4fa54","keyword":"酸轧机组","originalKeyword":"酸轧机组"},{"id":"684f41a3-ab59-4919-9359-c7c51e7f6b90","keyword":"测<span style=\"color:red\">张</span>辊","originalKeyword":"测张辊"},{"id":"73562d3f-7aac-47e8-aa62-9de0e87ad5f2","keyword":"冷轧带钢","originalKeyword":"冷轧带钢"},{"id":"c4f9713a-3335-4538-99ea-8403d4c12ebc","keyword":"表面划伤","originalKeyword":"表面划伤"}],"language":"zh","publisherId":"shjs200206005","title":"冷轧机组测<span style=\"color:red\">张</span>辊表面划伤的研究","volume":"24","year":"2002"},{"abstractinfo":"对断裂的汽车<span style=\"color:red\">张</span>紧轮紧固螺栓的显微组织、化学成分、硬度以及断口的宏、微观特征进行了综合分析,找出其断裂的原因.结果表明:螺栓在搓丝加工过程中挤压量过大,使螺纹尖端产生较多微裂纹,同时螺纹根部也存在一些加工缺陷,并在之后的热处理过程中进一步扩展;在使用过程中,微裂纹和加工缺陷处产生应力集中,使螺栓材料的疲劳强度降低,裂纹源的过早形成最终导致了螺栓发生疲劳断裂而失效.","authors":[{"authorName":"柴武倩","id":"da907f57-90f8-4c53-98bf-e3369a0b89a6","originalAuthorName":"柴武倩"},{"authorName":"杨强云","id":"a7086465-8523-42b4-9854-22ab6a3fd3f5","originalAuthorName":"杨强云"},{"authorName":"杨川","id":"8009d472-714c-4b40-be98-7d783ceea493","originalAuthorName":"杨川"},{"authorName":"高国庆","id":"7c8ab93c-3dd5-4af0-9a4f-28f1622efa78","originalAuthorName":"高国庆"},{"authorName":"崔国栋","id":"de001797-404a-4cb5-b0ed-e937bc85e3db","originalAuthorName":"崔国栋"}],"doi":"10.11973/jxgccl201509024","fpage":"103","id":"de2ae3fc-935a-4985-bed5-e3dec17b9161","issue":"9","journal":{"abbrevTitle":"JXGCCL","coverImgSrc":"journal/img/cover/JXGCCL.jpg","id":"45","issnPpub":"1000-3738","publisherId":"JXGCCL","title":"机械工程材料"},"keywords":[{"id":"fca7a64f-70c5-4cec-a74e-1e5413ce3901","keyword":"螺栓","originalKeyword":"螺栓"},{"id":"c902c41f-c6f5-41bd-8f37-8de4d8259594","keyword":"微裂纹","originalKeyword":"微裂纹"},{"id":"241ba6c4-95e4-425c-9942-023afc14ff39","keyword":"缺陷","originalKeyword":"缺陷"},{"id":"e4ae4e6c-cab5-4ae1-8863-83cbb54c0a40","keyword":"疲劳断裂","originalKeyword":"疲劳断裂"}],"language":"zh","publisherId":"jxgccl201509024","title":"汽车<span style=\"color:red\">张</span>紧轮紧固螺栓断裂分析","volume":"39","year":"2015"},{"abstractinfo":"在纤维束缠绕时施加<span style=\"color:red\">张</span>紧力,使得固化成型后的飞轮内部形成一定的预加径向压应力,这是提高飞轮径向强度的有效方法之一.基于过盈配合的思想建立了计算<span style=\"color:red\">张</span>紧力缠绕导致的复合材料飞轮内部预应力和变形的简化模型和方法.通过算例分析发现:等张力缠绕产生的环向应力在半径方向上先减小后增大,径向压应力不断变小;变张力缠绕过程中,<span style=\"color:red\">张</span>紧力由小逐渐变大时,飞轮的径向压应力增大,径向强度提高;飞轮设计中仅仅依靠<span style=\"color:red\">张</span>紧力缠绕是不够的,还必须和固化成型后的厚壁筒之间的过盈套装一起来设计合理的径向预加压应力.","authors":[{"authorName":"秦勇","id":"af6d458c-0798-4cb7-b698-30bc691b33b2","originalAuthorName":"秦勇"},{"authorName":"夏源明","id":"d865c7cb-7c8f-411b-9310-aa59550a6a92","originalAuthorName":"夏源明"},{"authorName":"毛天祥","id":"c4d5e1dc-6421-415a-a8b6-0a4021b94fd2","originalAuthorName":"毛天祥"}],"doi":"10.3321/j.issn:1000-3851.2003.06.017","fpage":"87","id":"eb32fe6a-aeec-4ee8-b3b0-8e92fed631d5","issue":"6","journal":{"abbrevTitle":"FHCLXB","coverImgSrc":"journal/img/cover/FHCLXB.jpg","id":"26","issnPpub":"1000-3851","publisherId":"FHCLXB","title":"复合材料学报"},"keywords":[{"id":"031af711-1656-42dd-811e-991de2cf2e4e","keyword":"复合材料飞轮","originalKeyword":"复合材料飞轮"},{"id":"6403bb38-7f8a-4d12-b7e6-f9aed0a53d34","keyword":"<span style=\"color:red\">张</span>紧力","originalKeyword":"张紧力"},{"id":"0033d921-d223-4324-a31c-a6e92e6877f3","keyword":"缠绕","originalKeyword":"缠绕"},{"id":"8637c0b3-6bd5-4b44-b015-77a5767c5d67","keyword":"过盈配合","originalKeyword":"过盈配合"},{"id":"b45ae1b8-9b85-4461-a291-11130105d070","keyword":"径向强度","originalKeyword":"径向强度"}],"language":"zh","publisherId":"fhclxb200306017","title":"纤维束<span style=\"color:red\">张</span>紧力缠绕复合材料飞轮的预应力简化分析","volume":"20","year":"2003"},{"abstractinfo":"张力调节是板带材生产工艺中的重要环节,为研究平整分卷线上三辊张力装置的增<span style=\"color:red\">张</span>机理和张力调节能力,采用弹塑性有限元方法对其工作过程进行数值模拟,得到了板厚、开卷张力、上张力辊压下量和设备结构参数等对张力装置增<span style=\"color:red\">张</span>能力的影响规律.将有限元模拟结果作为训练样本,结合国内某厂实测数据,建立了三辊张力装置增<span style=\"color:red\">张</span>能力的BP神经网络预测模型,预测结果与实测数据吻合良好,实现了张力调节定量控制.","authors":[{"authorName":"许石民","id":"19e1b82c-4fb6-4fd7-8331-6191035f5653","originalAuthorName":"许石民"},{"authorName":"黄华贵","id":"9caf8b77-a208-4058-811a-55c09c17ea8b","originalAuthorName":"黄华贵"},{"authorName":"臧新良","id":"f27b3a90-b44f-444f-a15f-b9548f313b35","originalAuthorName":"臧新良"},{"authorName":"杜凤山","id":"13c0be46-6277-429c-a9a0-3e88b5f4bb77","originalAuthorName":"杜凤山"},{"authorName":"蒋松","id":"27d54d06-1b96-48bc-aa98-a6fd0f62a7d0","originalAuthorName":"蒋松"}],"doi":"","fpage":"53","id":"bed55c6f-19c7-413c-a960-483a2717939f","issue":"7","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"036314ce-264a-4b1d-8bd8-13ec3d331321","keyword":"三辊张力装置","originalKeyword":"三辊张力装置"},{"id":"958ed6cf-48d1-423c-b216-5f64ae18d82d","keyword":"张力调节","originalKeyword":"张力调节"},{"id":"99b3c291-7530-497d-9973-80a0ab2f0386","keyword":"弹塑性有限元法","originalKeyword":"弹塑性有限元法"},{"id":"6c721ec7-205f-430e-9361-01a8cbcc4a89","keyword":"BP神经网络","originalKeyword":"BP神经网络"}],"language":"zh","publisherId":"gt200907014","title":"三辊张力装置增<span style=\"color:red\">张</span>能力的数值模拟分析","volume":"44","year":"2009"},{"abstractinfo":"针对平整分卷机组的分卷工作模式，采用弹塑性有限元方法对三辊张力装置增张过程进行数值模拟，得到了板厚、板宽、开卷张力、上张力辊压下位移量和结构参数等对张力装置增<span style=\"color:red\">张</span>能力的影响规律。将有限元模拟结果作为训练样本，结合国内某厂实测数据，建立了三辊张力装置增<span style=\"color:red\">张</span>能力的BP神经网络预测模型，预测结果与实测数据吻合良好，为张力装置增<span style=\"color:red\">张</span>定量控制提供了依据。","authors":[{"authorName":"许石民\t黄华贵\t臧新良\t杜凤山\t蒋松","id":"4891b941-17c8-428b-9296-789583ea0b9f","originalAuthorName":"许石民\t黄华贵\t臧新良\t杜凤山\t蒋松"}],"categoryName":"|","doi":"","fpage":"53","id":"ca392092-31ed-4b42-a8e6-395671b46e8c","issue":"7","journal":{"abbrevTitle":"GT","coverImgSrc":"journal/img/cover/GT.jpg","id":"27","issnPpub":"0449-749X","publisherId":"GT","title":"钢铁"},"keywords":[{"id":"d19ee4e9-aedf-4a74-b67b-c5f49655cc59","keyword":"三辊张力装置;张力调节;弹塑性有限元法;BP神经网络","originalKeyword":"三辊张力装置;张力调节;弹塑性有限元法;BP神经网络"}],"language":"zh","publisherId":"0449-749X_2009_7_12","title":"三辊张力装置增<span style=\"color:red\">张</span>能力的数值模拟分析","volume":"1","year":"2009"}],"totalpage":26,"totalrecord":254}