{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"以部分扩散预合金铁-铜-镍-钼-碳粉为原料,利用模壁润滑温压工艺获得高密度压坯,采用<span style=\"color:red\">烧结</span>硬化处理工艺<span style=\"color:red\">烧结</span>,研究了冷却速率和碳含量对<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>力学性能和显微组织的影响.结果表明:冷却速率对Fe-2Cu-2Ni-1Mo-xC(x=0.6,1.0)<span style=\"color:red\">材料</span>的力学性能影响显著,其抗拉强度、屈服强度和硬度均随冷却速率增大而提高;在2.8℃·s-1冷却速率时,1.0%C<span style=\"color:red\">材料</span>的抗拉强度为935 MPa,屈服强度为747 MPa,硬度为298 HB;0.6%C<span style=\"color:red\">材料</span>的抗拉强度为962 MPa,屈服强度为828 MPa,硬度为285 HB;伸长率均随冷却速率增大而下降;<span style=\"color:red\">材料</span>的显微组织均为马氏体、贝氏体、珠光体和残余奥氏体等的混合组织,快速冷却下主要为马氏体、贝氏体,慢速冷却时出现少量铁索体;碳含量对马氏体的类型影响较大,1.0%C时主要为片状马氏体,0.6%C时主要为板条马氏体.","authors":[{"authorName":"周玲","id":"ced0e225-a280-418a-87ca-74e7561720e9","originalAuthorName":"周玲"},{"authorName":"肖志瑜","id":"f27ff9fc-2b68-42e1-8073-402edfda90a5","originalAuthorName":"肖志瑜"},{"authorName":"沈元勋","id":"97c716c5-8da7-425c-b10e-7567c678db5f","originalAuthorName":"沈元勋"},{"authorName":"张文","id":"630411d3-08ed-4133-92eb-218a8ec97bfe","originalAuthorName":"张文"},{"authorName":"李元元","id":"35302cad-8b4b-411f-9161-6dcf961cb8a8","originalAuthorName":"李元元"}],"doi":"","fpage":"21","id":"e1974d68-642f-4ca2-96b4-aefbec90f055","issue":"8","journal":{"abbrevTitle":"JXGCCL","coverImgSrc":"journal/img/cover/JXGCCL.jpg","id":"45","issnPpub":"1000-3738","publisherId":"JXGCCL","title":"机械工程材料"},"keywords":[{"id":"124fe82c-c1d2-4ce2-83b4-c579b640ec06","keyword":"<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>","originalKeyword":"烧结材料"},{"id":"b156042b-8b54-4274-a347-a14e843d9991","keyword":"冷却速率","originalKeyword":"冷却速率"},{"id":"aa2def8b-7e35-4318-826f-19510389226d","keyword":"碳含量","originalKeyword":"碳含量"},{"id":"2edd34c3-0209-43ab-adc7-3f96b2e36e6d","keyword":"力学性能","originalKeyword":"力学性能"},{"id":"2113273f-ea4c-41b9-bf1c-a79f3e7687d7","keyword":"显微组织","originalKeyword":"显微组织"}],"language":"zh","publisherId":"jxgccl201008007","title":"冷却速率和碳含量对铁-铜-镍-钼-碳<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>组织与性能的影响","volume":"34","year":"2010"},{"abstractinfo":"采用粉末冶金技术制备Cu-SiO2<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>,研究了Cu-SiO2摩擦表面上的Si02颗粒与摩擦第三体的关系.结果表明,在摩擦中Cu-SiO2中的SiO2颗粒起钉扎点的作用,阻止第三体颗粒的运动,形成第三体塞积区,第三体的塞积面积和存在周期取决于SiO2颗粒的承载能力,SiO2颗粒的破损使第三体塞积区分解.第三体塞积区经历一个塞积-覆盖-分解-再塞积-再覆盖的过程;粘着性好的第三体充填到碎裂的SiO2裂纹中,对SiO2有夹持和覆盖的作用,有利于阻止碎裂的SiO2进一步剥落.随着SiO2含量的增加,起犁削作用的硬质点数增加,使摩擦系数提高;摩擦速度的提高伴随着温度的升高,容易形成连续而致密的第三体,有利于稳定摩擦系数;随着摩擦速度的降低,第三体疏松而不连续,容易脱离摩擦面而增大磨损量.","authors":[{"authorName":"符蓉","id":"847c6b4d-9871-452e-a3f2-cc8fecd4ac95","originalAuthorName":"符蓉"},{"authorName":"宋宝韫","id":"cbb5bceb-ea12-44bd-93aa-7cd0e9d25f83","originalAuthorName":"宋宝韫"},{"authorName":"高飞","id":"98738735-5373-40e1-aeb2-c4d00c525216","originalAuthorName":"高飞"},{"authorName":"王延辉","id":"3dde2efb-8927-4801-a779-9afedc00ce26","originalAuthorName":"王延辉"}],"doi":"10.3321/j.issn:1005-3093.2008.01.005","fpage":"31","id":"4daae26c-8e66-47b8-a0f1-96bdc58f2290","issue":"1","journal":{"abbrevTitle":"CLYJXB","coverImgSrc":"journal/img/cover/CLYJXB.jpg","id":"16","issnPpub":"1005-3093","publisherId":"CLYJXB","title":"材料研究学报"},"keywords":[{"id":"0da405d5-f1f3-4a1b-91e9-6ff406923ffa","keyword":"复合<span style=\"color:red\">材料</span>","originalKeyword":"复合材料"},{"id":"982adcd0-73d7-4061-8607-2ceac0a1aad1","keyword":"Cu-SiO2摩擦磨损","originalKeyword":"Cu-SiO2摩擦磨损"},{"id":"3e9d40bc-6cfe-4142-a682-072ac540ecfe","keyword":"<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>","originalKeyword":"烧结材料"},{"id":"95d2e3f9-92ae-4d92-8127-7d5aa623dc67","keyword":"第三体","originalKeyword":"第三体"}],"language":"zh","publisherId":"clyjxb200801005","title":"SiO2对摩擦第三体形成的作用","volume":"22","year":"2008"},{"abstractinfo":"介绍了钢渣的组成成分,简述了目前国内钢渣的主要处理工艺,对其中最为主流的热泼法、滚筒法、热闷法等钢渣处理工艺的工作原理及其优缺点进行简要评述.并在介绍钢渣特性的基础上,着重综述了钢渣在钢铁冶炼、建材生产、环境工程、农业等方面的综合利用途径.从钢渣综合利用的现状出发,总结了制约钢渣应用的问题,提出针对具体问题所需提高的钢渣再利用技术与理念,展望了钢渣利用的发展趋势.","authors":[{"authorName":"张朝晖","id":"efd8f47c-aa66-4b72-b0d7-d7448309ce3b","originalAuthorName":"张朝晖"},{"authorName":"廖杰龙","id":"418413a4-575e-486b-a6b9-7502d543b568","originalAuthorName":"廖杰龙"},{"authorName":"巨建涛","id":"aa95884b-ebcc-4eac-a4d2-b59716d1fffb","originalAuthorName":"巨建涛"},{"authorName":"党要均","id":"5ec414b6-9fb1-496e-b8db-1d7746e7a047","originalAuthorName":"党要均"}],"doi":"","fpage":"1","id":"20f5e88e-e7fe-4323-807b-fcaf8fcad9c2","issue":"7","journal":{"abbrevTitle":"GTYJXB","coverImgSrc":"journal/img/cover/GTYJXB.jpg","id":"30","issnPpub":"1001-0963","publisherId":"GTYJXB","title":"钢铁研究学报"},"keywords":[{"id":"52bf4f23-0cb2-4bea-8ba3-544585e0f732","keyword":"钢渣","originalKeyword":"钢渣"},{"id":"41bc1c3f-fe2b-4faa-8eca-8678637ffafb","keyword":"<span style=\"color:red\">烧结</span><span style=\"color:red\">材料</span>","originalKeyword":"烧结材料"},{"id":"89dd9f21-5986-412a-b556-3f9d51a0a391","keyword":"游离氧化钙","originalKeyword":"游离氧化钙"},{"id":"97bfe6a3-faaf-4044-bd5d-3d2ef171077a","keyword":"混凝土","originalKeyword":"混凝土"}],"language":"zh","publisherId":"gtyjxb201307001","title":"钢渣处理工艺与国内外钢渣利用技术","volume":"25","year":"2013"},{"abstractinfo":"<span style=\"color:red\">烧结</span>金属多孔<span style=\"color:red\">材料</span>兼具金属<span style=\"color:red\">材料</span>和多孔<span style=\"color:red\">材料</span>的特性,近年来受到广泛关注,在很多领域都得到应用.本文重点阐述<span style=\"color:red\">烧结</span>金属多孔<span style=\"color:red\">材料</span>的传统制备技术及特种制备技术.传统的制备技术主要分为固态<span style=\"color:red\">烧结</span>法、半固态<span style=\"color:red\">烧结</span>法、粉体熔化法.特种<span style=\"color:red\">烧结</span>技术包括激光选区<span style=\"color:red\">烧结</span>技术、放电等离子<span style=\"color:red\">烧结</span>技术等.","authors":[{"authorName":"李芬芬","id":"7fd7b138-9537-48fe-b810-a5e5a6044498","originalAuthorName":"李芬芬"},{"authorName":"沈以赴","id":"4f1c4242-d130-490c-a8cc-1d785f468064","originalAuthorName":"沈以赴"}],"doi":"","fpage":"33","id":"9a71dbb0-930d-4a82-9914-a1a878764d11","issue":"5","journal":{"abbrevTitle":"JSGNCL","coverImgSrc":"journal/img/cover/JSGNCL.jpg","id":"46","issnPpub":"1005-8192","publisherId":"JSGNCL","title":"金属功能材料"},"keywords":[{"id":"0069a8bb-0f0d-4fbd-be35-56ec34580f0e","keyword":"金属多孔<span style=\"color:red\">材料</span>","originalKeyword":"金属多孔材料"},{"id":"fb8e828c-5645-4236-8522-c750c0855af1","keyword":"传统<span style=\"color:red\">烧结</span>技术","originalKeyword":"传统烧结技术"},{"id":"418d0e94-55f9-41f7-9a42-9ac6599b6153","keyword":"特种<span style=\"color:red\">烧结</span>技术","originalKeyword":"特种烧结技术"}],"language":"zh","publisherId":"jsgncl200805009","title":"<span style=\"color:red\">烧结</span>法制备金属多孔<span style=\"color:red\">材料</span>","volume":"15","year":"2008"},{"abstractinfo":"讨论了热电<span style=\"color:red\">材料</span>热压<span style=\"color:red\">烧结</span>的特点和过程,针对不同类型的热电<span style=\"color:red\">材料</span>首次提出了内热、外热和内外热3种热压<span style=\"color:red\">烧结</span>方法及其相应的模具结构.试验显示,成形<span style=\"color:red\">烧结</span>方法结构简单、合理有效,可<span style=\"color:red\">烧结</span>出性能优良的热电块体<span style=\"color:red\">材料</span>.","authors":[{"authorName":"李瑜煜","id":"b45c137a-5ecc-4e24-8b83-ebdcae47257e","originalAuthorName":"李瑜煜"},{"authorName":"张仁元","id":"8a9d29b1-372c-4f21-8053-43f613a40b29","originalAuthorName":"张仁元"}],"doi":"","fpage":"126","id":"f9db55c0-c29f-47b0-a0f9-3a7b75eca93d","issue":"7","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"d86573f0-5196-48a3-a483-29b3527ea623","keyword":"热压<span style=\"color:red\">烧结</span>","originalKeyword":"热压烧结"},{"id":"6e0ae1bd-78e6-4a69-a795-45f13cfbc253","keyword":"热电<span style=\"color:red\">材料</span>","originalKeyword":"热电材料"},{"id":"42343a4b-3f33-43e2-942b-c8657db38725","keyword":"<span style=\"color:red\">烧结</span>方法","originalKeyword":"烧结方法"}],"language":"zh","publisherId":"cldb200707034","title":"热电<span style=\"color:red\">材料</span>热压<span style=\"color:red\">烧结</span>技术研究","volume":"21","year":"2007"},{"abstractinfo":"综述了近年来磁场<span style=\"color:red\">烧结</span>在<span style=\"color:red\">材料</span>制备中的应用情况,重点分析了磁场<span style=\"color:red\">烧结</span>对<span style=\"color:red\">烧结</span>动力学、<span style=\"color:red\">材料</span>组织结构等方面的影响,简要介绍了磁场<span style=\"color:red\">烧结</span>在超导<span style=\"color:red\">材料</span>制备中的应用.","authors":[{"authorName":"杨四新","id":"ac3a6bd6-3bcb-4c18-9995-b202c4a44c5e","originalAuthorName":"杨四新"},{"authorName":"黄继华","id":"9c96fb6c-235a-4c53-bc6b-29d4e04e1dee","originalAuthorName":"黄继华"}],"doi":"","fpage":"19","id":"2c13f0d7-9caf-4afd-923e-0035b555ecfa","issue":"2","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"bedfc0f9-746a-4e5f-b8b1-2a113bbbc4c0","keyword":"磁场<span style=\"color:red\">烧结</span>","originalKeyword":"磁场烧结"},{"id":"87e7034b-c2df-4cf8-9f12-70c3e13576b4","keyword":"<span style=\"color:red\">烧结</span>动力学","originalKeyword":"烧结动力学"},{"id":"5e8d4287-778e-4e48-af12-8e8ce454f8f4","keyword":"组织结构","originalKeyword":"组织结构"},{"id":"a8ee72cb-af08-46b7-bd6e-99b8ade19d6e","keyword":"超导<span style=\"color:red\">材料</span>","originalKeyword":"超导材料"}],"language":"zh","publisherId":"cldb200202007","title":"磁场<span style=\"color:red\">烧结</span>在<span style=\"color:red\">材料</span>制备中的应用","volume":"16","year":"2002"},{"abstractinfo":"微波<span style=\"color:red\">烧结</span>作为一种新型<span style=\"color:red\">材料</span><span style=\"color:red\">烧结</span>技术,在陶瓷<span style=\"color:red\">材料</span>制备领域受到越来越多的关注.与传统<span style=\"color:red\">烧结</span>技术相比,微波<span style=\"color:red\">烧结</span>具有快速高效、节能环保以及改善<span style=\"color:red\">材料</span>微观结构,提高<span style=\"color:red\">材料</span>性能的优点.本文介绍了传统<span style=\"color:red\">烧结</span>和微波<span style=\"color:red\">烧结</span>的特点,对比了传统<span style=\"color:red\">烧结</span>和微波<span style=\"color:red\">烧结</span>陶瓷<span style=\"color:red\">材料</span>的<span style=\"color:red\">烧结</span>工艺和力学性能;列举了运用微波<span style=\"color:red\">烧结</span>法制备的典型结构陶瓷的<span style=\"color:red\">烧结</span>工艺及其力学性能;全面综述了陶瓷<span style=\"color:red\">材料</span>微波<span style=\"color:red\">烧结</span>机理;最后提出了微波<span style=\"color:red\">烧结</span>在未来发展中亟待解决的问题.","authors":[{"authorName":"殷增斌","id":"e878cf28-b12c-44b2-9acb-1c36a309cde9","originalAuthorName":"殷增斌"},{"authorName":"袁军堂","id":"ac7aa361-80d7-4b9b-b814-c4e42dd8378e","originalAuthorName":"袁军堂"},{"authorName":"程寓","id":"267da3a6-f48e-4b0b-9aab-c098a6ac5e96","originalAuthorName":"程寓"},{"authorName":"汪振华","id":"b61408ec-0d35-4be7-b858-2738b5c58777","originalAuthorName":"汪振华"},{"authorName":"胡小秋","id":"751204af-0c37-478d-871e-549b8da32ea3","originalAuthorName":"胡小秋"}],"doi":"","fpage":"1492","id":"29a84e09-d300-46a5-ab39-f356f9430b5b","issue":"5","journal":{"abbrevTitle":"GSYTB","coverImgSrc":"journal/img/cover/GSYTB.jpg","id":"36","issnPpub":"1001-1625","publisherId":"GSYTB","title":"硅酸盐通报   "},"keywords":[{"id":"53b14809-6843-45ea-a1de-7678361cf9f6","keyword":"陶瓷<span style=\"color:red\">材料</span>","originalKeyword":"陶瓷材料"},{"id":"11f4f17c-d60e-4b31-8ff2-8db5437bc2aa","keyword":"微波<span style=\"color:red\">烧结</span>","originalKeyword":"微波烧结"},{"id":"3a05827f-542f-45f6-9ef9-99185c537401","keyword":"力学性能","originalKeyword":"力学性能"},{"id":"c7793c76-a670-40af-bd53-c8913648e200","keyword":"研究进展","originalKeyword":"研究进展"}],"language":"zh","publisherId":"gsytb201605029","title":"陶瓷<span style=\"color:red\">材料</span>微波<span style=\"color:red\">烧结</span>工艺与机理研究现状","volume":"35","year":"2016"},{"abstractinfo":"分析了快速<span style=\"color:red\">烧结</span>的理论依据,介绍了微波<span style=\"color:red\">烧结</span>和放电等离子<span style=\"color:red\">烧结</span>等快速<span style=\"color:red\">烧结</span>工艺的<span style=\"color:red\">烧结</span>原理和特点,指出快速<span style=\"color:red\">烧结</span>工艺在节能降耗,提高生产效率和改善<span style=\"color:red\">材料</span>性能等方面有潜在优势,有望在耐火<span style=\"color:red\">材料</span>行业得到开发应用.","authors":[{"authorName":"杨道媛","id":"81506c38-d24a-44ca-89ae-437ccbcdc6a1","originalAuthorName":"杨道媛"},{"authorName":"千粉玲","id":"83ef4292-8341-4077-8368-1099ef6bf776","originalAuthorName":"千粉玲"},{"authorName":"毋娟","id":"500d355a-1db6-49a1-a905-0b57301bcd04","originalAuthorName":"毋娟"},{"authorName":"朱凯","id":"986b0718-042a-4b66-9390-39a9fcbe571b","originalAuthorName":"朱凯"}],"doi":"10.3969/j.issn.1001-1935.2008.03.017","fpage":"226","id":"35ea5daa-e81d-4504-81b4-cb8fefedad9d","issue":"3","journal":{"abbrevTitle":"NHCL","coverImgSrc":"journal/img/cover/NHCL.jpg","id":"55","issnPpub":"1001-1935","publisherId":"NHCL","title":"耐火材料   "},"keywords":[{"id":"5bc5e934-40d2-4387-9040-2748ff99a5ca","keyword":"快速<span style=\"color:red\">烧结</span>","originalKeyword":"快速烧结"},{"id":"faa4a583-6748-4e06-a423-5fe2d54d3382","keyword":"微波<span style=\"color:red\">烧结</span>","originalKeyword":"微波烧结"},{"id":"5c90a6df-e9b4-4eea-8d50-9069ed0ec186","keyword":"放电等离子<span style=\"color:red\">烧结</span>","originalKeyword":"放电等离子烧结"}],"language":"zh","publisherId":"nhcl200803017","title":"快速<span style=\"color:red\">烧结</span>在耐火<span style=\"color:red\">材料</span>行业的应用前景","volume":"42","year":"2008"},{"abstractinfo":"为获得致密锆英石<span style=\"color:red\">材料</span>,以满足无碱玻璃纤维池窑内衬使用的需要,采用喷雾造粒、等静压成型和电炉烧成工艺,试验了TiO2,CaO,MgO,SiO2,Fe2O3和La2O3等不同添加剂在1500,1550,1600℃3种烧成温度下对锆英石<span style=\"color:red\">材料</span><span style=\"color:red\">烧结</span>性能的影响,并研究了TiO2的加入量及不同的烧成温度对锆英石<span style=\"color:red\">材料</span><span style=\"color:red\">烧结</span>性能的影响.结果表明:添加TiO2添加剂的试样密度最高,TiO2对锆英石的助烧作用最明显:TiO2加入量为0.6%(质量分数)时锆英石<span style=\"color:red\">材料</span>的<span style=\"color:red\">烧结</span>密度最大,TiO2的最佳加入量为0.6%;添加0.6%TiO2的锆英石<span style=\"color:red\">材料</span>烧成温度范围为1450～1550℃.","authors":[{"authorName":"耿可明","id":"783b1035-24cb-46f3-b065-bf7d2a76e256","originalAuthorName":"耿可明"},{"authorName":"曲远方","id":"c5bbfde1-a4da-41d3-8f96-3deabb1334b4","originalAuthorName":"曲远方"},{"authorName":"徐延庆","id":"bab1b11e-ddb6-4395-87f8-7d45e6f80db0","originalAuthorName":"徐延庆"},{"authorName":"范志辉","id":"52433965-3f81-44cc-ba2d-54d5fdc5d34c","originalAuthorName":"范志辉"},{"authorName":"孙红刚","id":"54725f73-baec-45d8-be33-789c431c77ab","originalAuthorName":"孙红刚"},{"authorName":"王金相","id":"153d1d04-e4f6-4c4f-9d6d-4a64d86fadc0","originalAuthorName":"王金相"}],"doi":"","fpage":"160","id":"46a6e880-0beb-41fe-8add-d03f48a21d17","issue":"z1","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"a1693ae2-d3e2-4279-aaa1-f190decfbb7a","keyword":"锆英石","originalKeyword":"锆英石"},{"id":"f35ec348-3a32-41aa-9a8d-cba352a0fcaa","keyword":"<span style=\"color:red\">烧结</span>","originalKeyword":"烧结"},{"id":"4dfa8444-e043-4062-9fe1-59b28e851c37","keyword":"添加剂","originalKeyword":"添加剂"},{"id":"07e5865b-5e3b-4e03-9b89-6b6645193779","keyword":"烧成温度","originalKeyword":"烧成温度"}],"language":"zh","publisherId":"xyjsclygc2008z1041","title":"锆英石<span style=\"color:red\">材料</span><span style=\"color:red\">烧结</span>性能研究","volume":"37","year":"2008"},{"abstractinfo":"研究了快速热压<span style=\"color:red\">烧结</span>和放电等离子快速<span style=\"color:red\">烧结</span>（ＳＰＳ）制备纳米Ｙ－ＴＺＰ<span style=\"color:red\">材料</span>．利用快速热压<span style=\"color:red\">烧结</span>和 ＳＰＳ快速<span style=\"color:red\">烧结</span>，可在<span style=\"color:red\">烧结</span>温度为 １２００℃、保温９～１０ｍｉｎ条件下，制得相对密度超过９９％的 Ｙ－ＴＺＰ<span style=\"color:red\">材料</span>．研究发现：虽然快速热压<span style=\"color:red\">烧结</span>和 ＳＰＳ<span style=\"color:red\">烧结</span>都可使Ｙ－ＴＺＰ在相同温度下的密度高于普通热压<span style=\"color:red\">烧结</span>，但两种快速<span style=\"color:red\">烧结</span>所得Ｙ－ＴＺＰ的晶粒都大于无压<span style=\"color:red\">烧结</span>所得；另外，快速热压<span style=\"color:red\">烧结</span>所得样品的结构不够均匀，而ＳＰＳ<span style=\"color:red\">烧结</span>的样品的均匀性较好．文章对产生这些现象的原因进行了理论探讨．","authors":[{"authorName":"李蔚","id":"fd70aa12-fe36-497c-a457-85d6817fdeda","originalAuthorName":"李蔚"},{"authorName":"高濂","id":"98d137c2-5e41-4cbe-ad34-7d4c021fae3f","originalAuthorName":"高濂"},{"authorName":"洪金生","id":"ffe60986-be9e-4a76-ad07-a208817f0825","originalAuthorName":"洪金生"},{"authorName":"宫本大树","id":"629cb6e5-4793-4daf-a4cb-446a8ae88c7e","originalAuthorName":"宫本大树"}],"categoryName":"|","doi":"","fpage":"269","id":"5933d1a1-8ffd-4be7-8eaa-8ddd57b5eca2","issue":"2","journal":{"abbrevTitle":"WJCLXB","coverImgSrc":"journal/img/cover/WJCLXB.jpg","id":"62","issnPpub":"1000-324X","publisherId":"WJCLXB","title":"无机材料学报"},"keywords":[{"id":"bed31955-107a-4b82-ad87-d4218fe63871","keyword":"纳米Y-TZP","originalKeyword":"纳米Y-TZP"},{"id":"43b76ec9-8923-4d9e-bf8a-81361ba65ff2","keyword":" SPS","originalKeyword":" SPS"},{"id":"ff5bb311-ce5d-49d9-9a37-aa598ba66035","keyword":" rapid hot-pressing","originalKeyword":" rapid hot-pressing"}],"language":"zh","publisherId":"1000-324X_2000_2_8","title":"快速<span style=\"color:red\">烧结</span>制备纳米Y-TZP<span style=\"color:red\">材料</span>","volume":"15","year":"2000"}],"totalpage":6058,"totalrecord":60577}