欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(3)
  • 图书()
  • 专利()
  • 新闻()

Calculation of Second Phase Particle-Grain Boundary Interaction Range

X.L. WAN

金属学报(英文版)

On the basis of the grain boundary equation by Hellman and corresponding analysis of Worner, this paper deals with the interaction range between the second-phase particle (SPP) and grain boundary (GB) as viewed from the applicability of grain boundary equation. Also, a new expression describing the interaction range has been derived, which solves the problem in theory that the interaction range between SPP and GB can only be qualitatively analyzed previously. It is shown that given the interaction position between SPP and GB the interaction range can be quantitatively determined by use of this expression.

关键词: second-phase particle , null , null , null

La、Ti处理对FeCrAl不锈钢凝固组织的影响

王振 , 刘建华 , 余晓艳

钢铁钒钛 doi:10.7513/j.issn.1004-7638.2013.03.021

采用金相显微镜(OM)和扫描电镜(SEM)对La、Ti处理的FeCrAl不锈钢铸锭凝固组织进行了分析研究,结果表明:未经La、Ti处理的纯铁素体不锈钢凝固组织中晶粒尺寸较大,纵向截面晶粒平均值为4.64mm,横向截面晶粒尺寸平均为4.71 mm;La处理不锈钢可以明显细化钢中凝固组织的晶粒尺寸;Ti在细化FeCrAl不锈钢晶粒的同时可以提高不锈钢的等轴晶率;加入La和Ti后形成的高熔点第二相粒子有利于细化晶粒,钢中析出的大量TiN可以提高凝固组织的等轴晶率.

关键词: FeCrAl不锈钢 , 凝固组织 , 第二相粒子 , 细化晶粒 , 等轴晶率

应变速率和固溶处理对7075铝合金锻件动态再结晶的影响

周建 , 张廷杰 , 张小明 , 马光来 , 田锋 , 周廉

稀有金属材料与工程

通过对不同状态的7075铝合金以不同的应变速率和不同的应变锻造,并利用了光镜(OM)、透射电镜(TEM)对热变形显微组织进行观察.实验表明:对于7075铝合金,较高的应变速率有利于出现动态再结晶,动态再结晶的方式为不连续动态再结晶,当应变速率较低时,只出现动态回复.弥散的第二相粒子在动态再结晶过程中起了重要作用.

关键词: 7075铝合金 , 固溶处理 , 应变速率 , 动态再结晶 , 第二相粒子

出版年份

刊物分类

相关作者

相关热词