{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"在蒸气养护工艺中,水化热与蒸养温度(恒温温度60 ℃)的协同下混凝土内部温度易超过80 ℃,使水化初期生成的钙矾石分解,并在温度降低以后,在硬化混凝土内重新生成.合理控制[SO42-]/[AlO2-]的阀值提高钙矾石分解温度,增强其稳定性;掺加矿渣等矿物掺和料可以降低混凝土中心水化热,从而避免达到钙矾石的分解温度,同时降低孔隙液的pH值,生成非膨胀性钙矾石.","authors":[{"authorName":"马保国","id":"715717f5-110f-4e21-bdfa-e11b0f81eda5","originalAuthorName":"马保国"},{"authorName":"温小栋","id":"d13ec57c-7466-42ce-98cd-bf11e6bb9529","originalAuthorName":"温小栋"},{"authorName":"潘伟","id":"b6e6c756-dc03-47c8-a0cd-e2f15565e38a","originalAuthorName":"潘伟"},{"authorName":"余曼丽","id":"f1cff93b-5ab9-4281-af08-dd972a405cf1","originalAuthorName":"余曼丽"},{"authorName":"鄢佳佳","id":"01d1b5d7-8cd8-482e-9e8e-720bb6d21f24","originalAuthorName":"鄢佳佳"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"052a9d02-9643-4e0f-b5d4-bf4ff4fb833f","originalAuthorName":"王明远"}],"doi":"10.3969/j.issn.1001-1625.2007.02.004","fpage":"237","id":"05b77b80-468e-48d7-8b87-7557286fad58","issue":"2","journal":{"abbrevTitle":"GSYTB","coverImgSrc":"journal/img/cover/GSYTB.jpg","id":"36","issnPpub":"1001-1625","publisherId":"GSYTB","title":"硅酸盐通报   "},"keywords":[{"id":"ee617e6f-3f1b-4816-89c0-629d4474efc9","keyword":"协同效应","originalKeyword":"协同效应"},{"id":"d0980501-65d6-4d1a-88cc-d30dd567907a","keyword":"延迟钙矾石生成","originalKeyword":"延迟钙矾石生成"},{"id":"afe6909a-01a7-4189-bbcf-807cb91ae711","keyword":"[SO42-]/[AlO2-]","originalKeyword":"[SO42-]/[AlO2-]"},{"id":"fc0824f5-450c-49be-b63b-fd9ad994f41f","keyword":"晶形转变","originalKeyword":"晶形转变"}],"language":"zh","publisherId":"gsytb200702004","title":"蒸养温度与水化热协同下混凝土热稳定性研究","volume":"26","year":"2007"},{"abstractinfo":"提出了一种基于双极工艺实现跨导线性电可调的跨导运算放大器(EOTA)电路模型,采用EOTA和接地电容实现了多输入单输出的通用滤波器设计.该滤波电路具有在高输入阻抗节点处提供低通、高通、带通、带阻的电压响应,同时容易级联生成任意阶高阶滤波器.该滤波器通过调整EOTA的偏置电压或电流来设置独立电控参数ω0或Q,且参数灵敏度低,线性范围宽且无需考虑电路参数匹配等特点,文中分析了利用EOTA实现通用双二次滤波器的工作原理及生成高阶滤波器的方法,讨论了两种滤波功能的特点,结果证实了理论分析的正确性.","authors":[{"authorName":"<span style=\"color:red\">王</span>芳","id":"04caff54-a8aa-4524-b767-d514006a5729","originalAuthorName":"王芳"},{"authorName":"周军晓","id":"d23d5ca3-08d5-48d4-a000-a7b17a5b2864","originalAuthorName":"周军晓"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"433e8c59-5a8d-4fea-a15e-4d55884c3543","originalAuthorName":"王明远"},{"authorName":"张软玉","id":"9d537470-8c7b-4d35-b804-9b881c51f2ff","originalAuthorName":"张软玉"},{"authorName":"李蕾","id":"a2cd1476-9adb-4826-ac8a-d01fbd746068","originalAuthorName":"李蕾"}],"doi":"","fpage":"463","id":"97bf8fe2-5087-4cb2-bd95-bfbddd10bffd","issue":"6","journal":{"abbrevTitle":"GNCLYQJXB","coverImgSrc":"journal/img/cover/GNCLYQJXB.jpg","id":"34","issnPpub":"1007-4252","publisherId":"GNCLYQJXB","title":"功能材料与器件学报   "},"keywords":[{"id":"c45d395a-e4e5-4c18-8720-c6628e225196","keyword":"跨导运算放大器","originalKeyword":"跨导运算放大器"},{"id":"820b99e3-63d7-44ef-b828-f6d46eb2cbf3","keyword":"通用滤波器","originalKeyword":"通用滤波器"},{"id":"e2c123c8-fd28-4d78-88d8-e05bebb5390b","keyword":"线性电可调","originalKeyword":"线性电可调"}],"language":"zh","publisherId":"gnclyqjxb201206007","title":"一种新型宽线性低灵敏度通用滤波器设计","volume":"18","year":"2012"},{"abstractinfo":"概述国内外关于镁铝尖晶石粉体的制备方法及这些方法的优缺点和适用范围,并将其归为固相法、湿化学法和燃烧合成法3类.分析表明,镁铝尖晶石的制备方法趋向于复合化,即集合两种或两种以上的方法来制备,以实现镁铝尖晶石粉体的高性能、高产量,同时满足传统产业和高技术领域的需求.","authors":[{"authorName":"武小娟","id":"b76878bb-add5-499f-98c2-fea139801b8b","originalAuthorName":"武小娟"},{"authorName":"李俊寿","id":"f7ae7be3-f4ba-4e7b-a14c-df3440732c35","originalAuthorName":"李俊寿"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"d663b222-8b83-4519-a9ae-b2ceaf781429","originalAuthorName":"王明远"},{"authorName":"李苏","id":"00a1c63d-5e46-420f-b06f-6ac374ff3138","originalAuthorName":"李苏"},{"authorName":"赵芳","id":"8ce9027a-2eca-4e24-8656-256da00cb544","originalAuthorName":"赵芳"}],"doi":"","fpage":"136","id":"fa2cbade-84ee-4b5b-9596-3668095c9e0b","issue":"3","journal":{"abbrevTitle":"BQCLKXYGC","coverImgSrc":"journal/img/cover/BQCLKXYGC.jpg","id":"4","issnPpub":"1004-244X","publisherId":"BQCLKXYGC","title":"兵器材料科学与工程   "},"keywords":[{"id":"e9a37e33-2afb-45b0-9030-7242c472a78b","keyword":"镁铝尖晶石","originalKeyword":"镁铝尖晶石"},{"id":"5c78cc08-74ee-461e-9db4-bb3cce4af1fd","keyword":"透明陶瓷","originalKeyword":"透明陶瓷"},{"id":"736fca82-34e0-452f-b16f-0a4448cf4365","keyword":"粉体","originalKeyword":"粉体"},{"id":"b2c6b9e7-e1d6-4b16-a872-9d4bba8982fa","keyword":"制备方法","originalKeyword":"制备方法"}],"language":"zh","publisherId":"bqclkxygc201503038","title":"镁铝尖晶石粉体的制备方法","volume":"38","year":"2015"},{"abstractinfo":"根据对Mg-B2o3-TiO2体系的热力学计算结果,对反应的顺序做出初步判断;然后用Cu楔块燃烧波淬息法分析SHS反应各区域产物的组成及形貌变化,研究了晶体的合成和生长机理.热力学计算结果表明:在反应过程中首先由Mg还原B2O3得到B和MgO,其次Mg还原TiO2得到Ti和MgO,最后B与Ti结合生成TiB2.对于在反应过程中的中间产物,生成Ti3O5、Ti2O3、TiO的可能性依次降低.实验结果表明:在燃烧中心由于反应较完全,没有产生中间产物;反应次中心和边缘的温度仍然较高,有少量的Ti2O3、TiO;在燃烧底部因温度较低反应不完全,因而有少量的Ti3O5,实验结果与热力学分析结果吻合.在反应过程中MgO先形核长大,部分TiB2附着在MgO上形核,随着温度的升高形成了细小的颗粒;部分TiB2在粗大的MgO之间独立形核,生长成典型的六角晶型;TiB2的生长机理属于L-S机理,B和Ti交互富集生成了典型的六角晶型.","authors":[{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"e14e79f0-ad9e-4778-aea4-645db4b90946","originalAuthorName":"王明远"},{"authorName":"李俊寿","id":"9fab8945-7f04-4ac9-9c10-f1db07b8672f","originalAuthorName":"李俊寿"},{"authorName":"武小娟","id":"f3648800-87de-429a-a369-b2cfc5724de8","originalAuthorName":"武小娟"},{"authorName":"李苏","id":"0d2a79b7-bb75-4bc0-8777-768439a59494","originalAuthorName":"李苏"},{"authorName":"赵芳","id":"403243ed-7a17-44a4-b945-6286a069baee","originalAuthorName":"赵芳"}],"doi":"","fpage":"32","id":"f9dcc65f-021b-478c-ac9f-8d3c6c1c8826","issue":"1","journal":{"abbrevTitle":"CLYJXB","coverImgSrc":"journal/img/cover/CLYJXB.jpg","id":"16","issnPpub":"1005-3093","publisherId":"CLYJXB","title":"材料研究学报"},"keywords":[{"id":"6c52cbfd-e926-4662-8536-93dde74c82a3","keyword":"无机非金属材料","originalKeyword":"无机非金属材料"},{"id":"76788f69-907d-446b-9c3b-39c0864c0477","keyword":"TiB2","originalKeyword":"TiB2"},{"id":"a894362e-58c6-46d0-a43f-f54cbeecbf9a","keyword":"SHS","originalKeyword":"SHS"},{"id":"dca96a78-0bbc-43e6-a901-109befca90e8","keyword":"燃烧波淬息法","originalKeyword":"燃烧波淬息法"},{"id":"9650e1a7-6f95-4ed8-8d17-fd3984ce69af","keyword":"合成机理","originalKeyword":"合成机理"}],"language":"zh","publisherId":"clyjxb201501005","title":"Mg-B2O3-TiO2系的自蔓延高温合成机理","volume":"29","year":"2015"},{"abstractinfo":"普通硅酸盐水泥在尾砂胶结充填中被广泛使用，但存在两个问题：水泥生产过程能耗高，需要大量不可再生资源、CO2排放量大；充填成本高，灰砂比可调范围窄，适应性差。为消除该影响，可采用工业副产品粒化高炉矿渣，辅以少量激发材料形成不同类型固化剂以取代水泥固化尾砂。该类固化剂水化所需碱度低，形成的水化硅酸钙在钙硅比上比普通硅酸盐水泥低，因而其强度和稳定性优异，同时可形成水滑石等产物填充结构孔隙；此外，还能因地制宜调整固化剂配方，固化剂性价比高，可在满足充填需求的同时提高对尾砂的适应性和固化效率。","authors":[{"authorName":"邓晓轩","id":"b115c08f-1376-4cbe-8cb0-66bedb8a769f","originalAuthorName":"邓晓轩"},{"authorName":"纪宪坤","id":"041f8f99-f7e5-4cef-9ad1-e77211736111","originalAuthorName":"纪宪坤"},{"authorName":"田均兵","id":"f53a9a53-1dd1-49c8-849c-161f37240d51","originalAuthorName":"田均兵"},{"authorName":"杨欣华","id":"f886cd32-3a39-42bd-8307-1079d44b6138","originalAuthorName":"杨欣华"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"7d0b2d25-d846-4389-9f87-492249c5fed5","originalAuthorName":"王明远"}],"doi":"10.11896/j.issn.1005-023X.2016.05.017","fpage":"95","id":"b84efc75-7b91-4a99-9aba-2647bc64c3f4","issue":"5","journal":{"abbrevTitle":"CLDB","coverImgSrc":"journal/img/cover/CLDB.jpg","id":"8","issnPpub":"1005-023X","publisherId":"CLDB","title":"材料导报"},"keywords":[{"id":"42f9e18d-80af-4bc0-b719-64000e70eda6","keyword":"粒化高炉矿渣","originalKeyword":"粒化高炉矿渣"},{"id":"2f6c6ab1-9d67-42ba-a4e5-fc1b9941d429","keyword":"尾砂","originalKeyword":"尾砂"},{"id":"48ea70a0-81a4-40db-9446-92bfb8029a3f","keyword":"胶结充填","originalKeyword":"胶结充填"}],"language":"zh","publisherId":"cldb201605017","title":"矿渣在尾砂胶结充填中的应用与研究进展?","volume":"30","year":"2016"},{"abstractinfo":"以Mg、Al、TiO2和B2 O3粉体为原料,采用自蔓延高温合成法合成了 MgAl2 O4和 TiB2复合粉体,用稀硝酸除去产物中的TiB2及残余反应物后,获得了较高纯度的MgAl2 O4。然后用MgO 部分取代 Mg 研究了不同Mg源对合成产物的影响,用XRD和SEM检测了两组反应获得的MgAl2 O4粉体,用激光粒度测试仪分析了产物的粒径大小及分布,用红外光谱仪测试了粉体性能较佳的反应酸洗产物的红外透光率。结果表明,以单一Mg 粉为Mg源时,MgAl2 O4的相对含量为85．96％,且颗粒较小,平均粒径为5．36μm,粒径分布较集中,0．1~10μm 的颗粒占80．68％；以(Mg＋MgO)为Mg源时,MgAl2 O4的相对含量为71．55％,且颗粒较大,平均粒径为11．18μm,粒径分布较分散,0．1~10μm的颗粒占54．96％；综合考虑,以Mg为镁源获得的MgAl2 O4粉体性能好,经红外光谱分析,可得,MgAl2 O4透过率高,透过波段范围宽,在1100~2978 cm－1之间的红外透过率达到50％以上,高透光率的镁铝尖晶石具有低的辐射率,可应用于红外隐身材料。","authors":[{"authorName":"武小娟","id":"87a67ae5-b27e-4de6-8d86-72cbc0c4abf2","originalAuthorName":"武小娟"},{"authorName":"李俊寿","id":"b07034ee-b7f4-4324-8023-992b9d9fd962","originalAuthorName":"李俊寿"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"3103acc4-bb57-409f-89b6-69316c0f3fa2","originalAuthorName":"王明远"},{"authorName":"李苏","id":"0ff9f0fd-ccd8-4478-b189-efb38575817e","originalAuthorName":"李苏"}],"doi":"10.3969/j.issn.1001-9731.2016.04.036","fpage":"4178","id":"888ab31c-034c-4a55-86fa-634f904e5ad5","issue":"4","journal":{"abbrevTitle":"GNCL","coverImgSrc":"journal/img/cover/GNCL.jpg","id":"33","issnPpub":"1001-9731","publisherId":"GNCL","title":"功能材料"},"keywords":[{"id":"40d3fe70-8a35-4495-9cb6-40a8430b2f7e","keyword":"自蔓延高温合成法","originalKeyword":"自蔓延高温合成法"},{"id":"b75016d0-31e5-4665-8bfc-437de957acc9","keyword":"镁铝尖晶石","originalKeyword":"镁铝尖晶石"},{"id":"c3977ba8-11c1-4c16-9264-84ce815bc216","keyword":"粉体","originalKeyword":"粉体"}],"language":"zh","publisherId":"gncl201604036","title":"镁铝尖晶石粉体的制备与表征","volume":"47","year":"2016"},{"abstractinfo":"透明镁铝尖晶石陶瓷的制备,对粉体有特殊的要求.高纯、超细、分散性好、高活性的粉体是制备镁铝尖晶石透明陶瓷的首要条件.本文以制备镁铝尖晶石透明陶瓷为目标,从粉体的纯度和粉体颗粒特征两方面分析了粉体的性能对制备透明镁铝尖晶石陶瓷的影响,介绍了几种可用于制备镁铝尖晶石透明陶瓷粉体的方法,分析比较了每种方法的优缺点.","authors":[{"authorName":"武小娟","id":"8b04485e-4099-4091-89bb-3ecb64cf1c3b","originalAuthorName":"武小娟"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"aef02d06-a813-4c52-afd1-e87e2ade2e81","originalAuthorName":"王明远"},{"authorName":"张翼飞","id":"4000993a-2b29-4508-84b1-74da8d406d68","originalAuthorName":"张翼飞"},{"authorName":"李苏","id":"ab8b8094-edd9-45de-9c5d-ccb7b59a26d6","originalAuthorName":"李苏"},{"authorName":"李俊寿","id":"62c8a355-6c49-4e06-8704-5824fa2050cc","originalAuthorName":"李俊寿"}],"doi":"","fpage":"137","id":"af8ebdc2-780c-45bf-b52f-3b2947987d47","issue":"1","journal":{"abbrevTitle":"GSYTB","coverImgSrc":"journal/img/cover/GSYTB.jpg","id":"36","issnPpub":"1001-1625","publisherId":"GSYTB","title":"硅酸盐通报   "},"keywords":[{"id":"725ec8a2-2201-4f57-a849-99c160496fe0","keyword":"MgAl2O4","originalKeyword":"MgAl2O4"},{"id":"a58e8e06-7cd6-4cb3-aca7-5f396825a557","keyword":"透明陶瓷","originalKeyword":"透明陶瓷"},{"id":"bc105cec-4144-4689-aa3f-847b34225f2d","keyword":"复合氧化物","originalKeyword":"复合氧化物"},{"id":"10ded221-ba20-46d3-937a-56fad410952a","keyword":"透波材料","originalKeyword":"透波材料"},{"id":"4e741c37-3d6b-4f02-b3ec-a46ad65560ee","keyword":"粉体","originalKeyword":"粉体"}],"language":"zh","publisherId":"gsytb201601025","title":"MgAl2O4透明陶瓷粉体的研究进展","volume":"35","year":"2016"},{"abstractinfo":"针对Ti-Si-B4C-C反应体系,在进行热力学分析的基础上,采用燃烧合成法制备了复相陶瓷粉体,采用XRD、SEM对反应产物的物相和组织结构进行表征,探讨了燃烧反应机理.研究结果表明,所制备复相陶瓷由Ti3SiC2 、TiB2 、TiC三相组成,其质量分数分别为44.2％、27.9％、27.9％.TiB2相以棱角分明的颗粒形态存在,TiC相以不规则的球形颗粒存在,两种颗粒弥散分布于具有典型层状结构Ti3SiC2基体中.Ti-Si-B4C-C体系反应机理可以概括为Ti与C的燃烧反应、Ti-Si熔体的形成、B的还原与Ti3SiC2的合成、TiB2的生成与长大四个基本过程.","authors":[{"authorName":"李俊寿","id":"77f125c0-1d18-45a7-83c6-bc956c872d4a","originalAuthorName":"李俊寿"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"86d38ac2-f854-4da5-8e83-aab21ee3c651","originalAuthorName":"王明远"},{"authorName":"张翼飞","id":"c87f0fa4-e1d1-4ded-9e29-98f2430138bc","originalAuthorName":"张翼飞"},{"authorName":"张颖","id":"87080a93-c951-4f10-93fc-0396a21ed07a","originalAuthorName":"张颖"},{"authorName":"武小娟","id":"87e2294f-0772-4f9e-be9d-4b39c2ebddd2","originalAuthorName":"武小娟"}],"doi":"10.3969/j.issn.1007-2330.2016.03.010","fpage":"47","id":"5ecc53e5-7b24-4f20-b5e2-c46836553fa3","issue":"3","journal":{"abbrevTitle":"YHCLGY","coverImgSrc":"journal/img/cover/YHCLGY.jpg","id":"77","issnPpub":"1007-2330","publisherId":"YHCLGY","title":"宇航材料工艺   "},"keywords":[{"id":"7c4e2dd5-f4c7-4ae9-b16c-515833360363","keyword":"Ti3SiC2","originalKeyword":"Ti3SiC2"},{"id":"7de51d1a-dd4f-4168-ad2c-c0ae5400e6a9","keyword":"TiB2","originalKeyword":"TiB2"},{"id":"62df8913-2ed6-456b-bbcd-3ea8a88d12d1","keyword":"复相陶瓷","originalKeyword":"复相陶瓷"},{"id":"0c8e0edf-f699-415b-9f98-55207de440d9","keyword":"燃烧合成","originalKeyword":"燃烧合成"}],"language":"zh","publisherId":"yhclgy201603010","title":"Ti-Si-B4C-C系的燃烧反应机理","volume":"46","year":"2016"},{"abstractinfo":"采用SHS法合成了Ti2AlC、TiB2 、TiC三相复合陶瓷粉体;应用SPS技术制备了Ti2AlC/TiB2/TiC块体复相陶瓷材料;采用XRD、SEM和EDS等手段对复相材料的相组成、微观形貌进行了分析.研究结果表明:在所制备的复相块体陶瓷中,Ti2AlC为基体相,TiB2和TiC弥散分布于基体相中;复相块体陶瓷具有高的致密度,为99.6％;显微硬度平均为12.96 GPa;断裂韧性为45.28 MPa· m1/2,这为下一步研究其可加工性提供了实验依据.","authors":[{"authorName":"赵芳","id":"234ac608-d8c3-43d6-bf6c-84525a9e3efb","originalAuthorName":"赵芳"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"35316684-aa8b-4ae4-a4db-c845100772e4","originalAuthorName":"王明远"},{"authorName":"唐香珺","id":"8628e13b-0f71-4add-ad99-073fde88b36e","originalAuthorName":"唐香珺"},{"authorName":"张翼飞","id":"45580dac-4548-4ca2-be18-2e02dcedde10","originalAuthorName":"张翼飞"},{"authorName":"李俊寿","id":"f26e1425-fd54-4f63-a0b3-5d3f95141c9f","originalAuthorName":"李俊寿"}],"doi":"10.3969/j.issn.1007-2330.2016.05.006","fpage":"38","id":"068f1751-2a3a-428e-8155-8dde3fe271f0","issue":"5","journal":{"abbrevTitle":"YHCLGY","coverImgSrc":"journal/img/cover/YHCLGY.jpg","id":"77","issnPpub":"1007-2330","publisherId":"YHCLGY","title":"宇航材料工艺   "},"keywords":[{"id":"ad2e6488-45dc-4288-bc27-bd96a17f8ff9","keyword":"Ti2AlC","originalKeyword":"Ti2AlC"},{"id":"40166fa6-6292-463c-be34-54728f5846b0","keyword":"TiB2","originalKeyword":"TiB2"},{"id":"b5d404a4-2e9b-4386-aba7-6c5de8ebd595","keyword":"复相陶瓷","originalKeyword":"复相陶瓷"},{"id":"e508abd8-cd9d-44de-a39c-32ec59fa0298","keyword":"力学性能","originalKeyword":"力学性能"}],"language":"zh","publisherId":"yhclgy201605006","title":"Ti2AlC/TiB2/TiC复相陶瓷的制备及性能研究","volume":"46","year":"2016"},{"abstractinfo":"在无水乙醇中,用三乙胺和1-亚硝基.2,7-二羟基萘以及1,2,3,3-四甲基吲哚碘化物一步法反应,合成了9'-羟基吲哚啉螺萘并噁嗪;进一步在无水乙醚中,用三乙胺和9'-羟基吲哚啉螺萘并噁嗪以及丙烯酰氯反应,合成了9'-丙烯酰氧基吲哚啉螺萘并噁嗪染料.分析了有机碱三乙胺在这两步合成中的催化作用,通过实验对比选择了高产率易操作的合成路线.将打印纸在题示染料的丙酮溶液中浸渍,经太阳光照射显示出良好的光致变色性能.","authors":[{"authorName":"孙宾宾","id":"961fc770-8d73-4523-bb7d-c6e5b5e0ea44","originalAuthorName":"孙宾宾"},{"authorName":"焦文锡","id":"981d1c3d-f7be-4110-982c-c6c8f5d1602a","originalAuthorName":"焦文锡"},{"authorName":"<span style=\"color:red\">王</span><span style=\"color:red\">明</span><span style=\"color:red\">远</span>","id":"a3eb34da-2e0a-40ed-95df-5ee6171a68b8","originalAuthorName":"王明远"}],"doi":"10.3969/j.issn.1671-5381.2009.03.007","fpage":"24","id":"905309b2-9022-47d1-b274-a4dc10e6f085","issue":"3","journal":{"abbrevTitle":"HCCLLHYYY","coverImgSrc":"journal/img/cover/HCCLLHYYY.jpg","id":"42","issnPpub":"1671-5381","publisherId":"HCCLLHYYY","title":"合成材料老化与应用"},"keywords":[{"id":"e2a1c10c-08ce-4e16-88fe-00641d5f33b6","keyword":"螺噁嗪","originalKeyword":"螺噁嗪"},{"id":"574fa3d0-a9ce-4de5-b7f8-a9cf9c8d6756","keyword":"合成","originalKeyword":"合成"},{"id":"a9227feb-d511-406b-9482-d67b4c055eb4","keyword":"三乙胺","originalKeyword":"三乙胺"},{"id":"646b9282-4549-4348-8fc2-c980ca431c9f","keyword":"催化","originalKeyword":"催化"}],"language":"zh","publisherId":"hccllhyyy200903007","title":"用三乙胺催化合成丙烯酰氧基吲哚啉螺萘并噁嗪染料","volume":"38","year":"2009"}],"totalpage":147,"totalrecord":1462}